JP1 Remotes

HkyFrk · Joined: 27 Dec 2003 Posts: 32

Does anyone know of any discrete codes for a Sharp TV (app. 4 years old).

The Robman · Posted: Wed Dec 31, 2003 10:05 am Post subject:

You might want to include some additional information, if you don't want people to just ignore this post. For starters, if you are using a standard UEI setup code, please state what it is. If you have created your own upgrade for it, please state the protocol and device code(s) used.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

HkyFrk · Joined: 27 Dec 2003 Posts: 32

Sorry... Just getting started with all this stuff. I am using 0093 setup code for the TV. The power switch is a toggle and I want to be able to turn the TV on and off within a macro.

Thanks

johnsfine · Posted: Wed Dec 31, 2003 10:12 am Post subject:

Assuming you really mean "discrete codes" (our terminology confuses some), always tell the setup code when you ask for discrete codes.

If you really meant something other than what we mean by "discrete codes" then answer the usual questions from the "sticky post". Do you have a Jp1 cable? Do you have a learning remote? What do a few of your learned signals decode as? etc.

HkyFrk · Joined: 27 Dec 2003 Posts: 32

thanks John... I have a cable and a 8811. I learned some codes to my remote from a different device, would that help? Should I learn the power and some other commands from the Sharp OEM remote to further help in my quest. Once again thanks for all the help.

johnsfine · Posted: Wed Dec 31, 2003 10:28 am Post subject:

No need to learn any codes. I wrote my above message before I saw the two messages ahead of it.

TV/0093 is Sharp protocol, device 1. There is a lot of data on EFC codes for it at Rob's site
http://www.hifi-remote.com/cgi-bin2/ueic.cgi?TV_0093
but I don't see any discrete On or Of commands. There is much less data on it in my collection of CCF files (and again no discrete On or Off codes). You could try the commands not listed on Rob's site and see if you find any, but note the warnings there, plus it sounds like whoever reported that list already tried all the codes, so the discrete On and Off probably don't exist.