Philips DSR 6201 HD SAT Receiver

If you have learned signals that don't get decoded when you look at them in IR.exe, post your file to the Diagnosis Area then post your question here (including a link to the file).

Moderator: Moderators

Post Reply
Loschack
Posts: 6
Joined: Wed Jun 20, 2007 5:16 am

Philips DSR 6201 HD SAT Receiver

Post by Loschack »

Protocol not recognized:

1. Device: Philips DSR 6201
2. Type of device: SAT HD Receiver
3. Year: 2007
4. UEI Remote model: URC-6690B00
5. Do you have a JP1 cable? yes
6. Still have original remote? yes
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? yes
9. Partially working setup code? no
10. Learning remote question? file is here


These are learned IR Signals from the reveiver's original remote, which I try to add to my SlingBox.
Top
The Robman
Site Owner
Posts: 21894
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

Here's an upgrade...
http://www.hifi-remote.com/forums/dload ... le_id=4884

and here's a "PL" Slingbox file...
http://www.hifi-remote.com/forums/dload ... le_id=4885
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
Loschack
Posts: 6
Joined: Wed Jun 20, 2007 5:16 am

Post by Loschack »

The Robman wrote:Here's an upgrade...
http://www.hifi-remote.com/forums/dload ... le_id=4884

and here's a "PL" Slingbox file...
http://www.hifi-remote.com/forums/dload ... le_id=4885
Works like a charm, thank You very much!!

Best Regards!
Top
Post Reply

Return to “JP1 - Protocol Decodes”