View previous topic :: View next topic |
Author |
Message |
eduardo1982
Joined: 24 Jul 2007 Posts: 2
|
Posted: Tue Jul 24, 2007 3:35 am Post subject: problem with URC 7780 (oneforall) |
|
|
Hi all,
Hi trayed to upgrade a brand new URC 7780 remote by internal modem (play sound of upgrade file from PC speakers). The remote say download successfull but after few second the light turned on and the power key is blinking all time. Also removing battery and renserting them the remote still with no message into LCD display light ON and POWER Key blinking.
Someone know how to recover to remote to factory default?
Thanks
Ed |
|
Back to top |
|
|
Brufort
Joined: 27 Jul 2007 Posts: 1
|
Posted: Fri Jul 27, 2007 1:12 pm Post subject: |
|
|
I've had the same problem with my 2day old URC7780 after updating via intenet. I've also tried to remove the batteries.Furthermore I connected the Pins 3 and 5 of the JP1-Connector to Reset, but nothing happens.
I solved the Problem by Pressing the ON-Button during reinserting the Batteries. |
|
Back to top |
|
|
eduardo1982
Joined: 24 Jul 2007 Posts: 2
|
Posted: Mon Jul 30, 2007 10:33 am Post subject: |
|
|
Thanks, you mean the POWER ON key as ON key?
Ed |
|
Back to top |
|
|
kevjs1982
Joined: 05 Apr 2008 Posts: 43 Location: East Midlands, UK |
Posted: Sat Apr 05, 2008 11:38 am Post subject: |
|
|
I ended up with my remote getting stuck in the same state after pushing a JP1 upgrade to my URC-7780, the way I fixed it was to upload my original download again - this fixed it.
When playing around with config I found trying to replaced the HT mode with a normal device would have the same effect (as well as selecting invalid numbers!) so that first back up is the best way of fixing it (unless anyone knows any better)
(Sorry to dredge up an hold thread, but this was the only post I came across while trying to fix the problem, and I hope it helps someone else in the future). _________________ URC-7780 OneForAll Digital 12 and URC-7556 OneForAll Digital 5 |
|
Back to top |
|
|
|