JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Daewoo LCD TVs - DLP/DLT/DLV 26/32/37/42 (complete codes)

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Code Search (Closed)
View previous topic :: View next topic  
Author Message
DarcyW



Joined: 03 Jul 2007
Posts: 3

PostPosted: Tue Jul 03, 2007 1:46 am    Post subject: Daewoo LCD TVs - DLP/DLT/DLV 26/32/37/42 (complete codes) Reply with quote

Hi, okay... I've trawled this forum for about two years but have never been able to offer anything. I've searched fairly extensively to make sure this isn't a double up and it doesn't appear to be.

Here is the COMPLETE list of Daewoo IR codes for the above TVs - and possibly more.

These are the codes produced by the remote with the model number R55Bxx.

These codes are directly from Daewoo. If there is a better place to put this post then my apologies in advance.

If you are looking for a code to jump directly to a video source (the remotes only have a single button applying to multiple sources) then have a look at the entries towards the bottom prepended with "CASTEL" (whatever that means)

Regards
Darcy



CST DAT
14H 00H 0/10
14H 01H 1
14H 02H 2
14H 03H 3
14H 04H 4
14H 05H 5
14H 06H 6
14H 07H 7
14H 08H 8
14H 09H 9
14H 0AH SOUND MODE
14H 0BH 100
14H 0CH TV/CATV
14H 0DH SLEEP
14H 11H RECALL
14H 12H MUTE
14H 13H "VOL UP ▶"
14H 14H "VOL DOWN ◀"
14H 15H POWER
14H 16H AV/COMP
14H 17H "CH UP ▲"
14H 18H "CH DOWN ▼"
14H 1BH SOUND EFFECT
14H 20H PREVIOUS CH
14H 22H MENU
14H 25H "CAPTION TEXT"
14H 26H PANEL LOCK
14H 27H "PICTURE MODE NORMAL"
14H 28H PIP.ON/OFF
14H 29H P.SWAP
14H 2AH P.STILL
14H 2BH P.POSITION
14H 2CH P.INPUT
14H 2DH P.CH UP
14H 2EH ADD/DEL
14H 2FH P.CH DOWN
14H 32H T.RED
14H 33H T.GREEN
14H 34H T.YELLOW
14H 35H T.CYAN
14H 36H GUIDE
14H 37H ■(ENTER)
14H 3CH FAVORITE CH
14H 3DH WIDE MODE
14H 3EH SUBTITLE
14H 40H T.MIX
14H 41H T.INDEX
14H 42H T.HOLD
14H 43H T.SIZE
14H 44H T.SUB CODE
14H 45H T.REVEAL
14H 48H T.CANCEL
14H 4EH MINIOR CHANNEL UP
14H 4FH MINIOR CHANNEL DOWN
14H 52H PROG. GUIDE
14H 54H "DTV/PC (000218)"
14H 55H KEY ALL SENSOR
14H 56H CHILD LOCK DISPLAY
14H 58H S5
14H 59H S6
14H 5AH S7
14H 5BH S8
14H 5CH S9
14H 5DH S10
14H 5EH S11
14H 5FH S12
14H 61H Digital/Analog
14H 62H RESERVED
14H 63H CASTEL POWER ON
14H 64H CASTEL POWER DOWN
14H 65H CASTEL ATV
14H 66H CASTEL DTV
14H 67H CASTEL PC
14H 68H RESERVED
14H 69H RESERVED
14H 6AH REMOCON CALL
14H 6BH
14H 6CH
14H 6DH
14H 6EH
14H 6FH
14H 70H
14H 71H
14H 72H
14H 73H
14H 73H
14H 74H
14H 75H
14H 76H RESERVED
14H 77H FACTORY MODE
14H 78H CASTEL AV1
14H 79H CASTEL AV2
14H 7AH CASTEL COMP1
14H 7BH CASTEL COMP2
14H 7CH CASTEL HDMI
14H 7DH CASTEL SD_MS_MMC 1
14H 7EH CASTEL HDMI 2
14H 7FH CASTEL HDMI 3
14H 80H COMPONENT
14H 81H TV
14H 82H Color Temp
14H 83H CASTEL SD_MS_MMC 2
14H 84H
14H 85H
14H 86H
14H 87H
14H 88H
14H 89H
14H 8AH
14H 8BH
14H 8CH
14H 8DH
14H 8EH
14H 8FH
14H 90H
14H 91H
14H 92H
14H 93H
14H 94H
14H 95H
14H 96H
14H 97H
14H 98H
14H 99H
14H 9AH
14H 9BH
14H 9CH S1
14H 9DH S2
14H 9EH S3
14H 9FH S4
Back to top
View user's profile Send private message
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3953

PostPosted: Tue Jul 03, 2007 3:41 am    Post subject: Reply with quote

Thanks, but, these are more useful to the JP 1 user if you just upload your actual KM or RM upgrade file to the Device Upgrade section of the File Area.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes:Atlas OCAP URC 1056, Harmony One, OFA XSight Touch, AR XSight Touch
TVs: Panasonic TH-50PE700U; LG 65" Smart LED TV; RCVR: Pioneer VSX-D2016S;Onkyo TX-SR875
DVD/VCR: LG Blu-Ray player, Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A1 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc/CD changer: Pioneer CLD-704.
Streaming: Intel NUC PC
(But I still have to get up for my beer)
Back to top
View user's profile Send private message Send e-mail
DarcyW



Joined: 03 Jul 2007
Posts: 3

PostPosted: Tue Jul 03, 2007 4:11 am    Post subject: Reply with quote

Thanks for the tip. It's been so long since I've played with my URC9960 that I've totally forgotten how to create keymaps and how to use the progams together. As soon as I create an rmdu for it i'll upload it. At my rate that may be a week or so away - these might be useful to someone now Smile
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18406
Location: Chicago, IL

PostPosted: Tue Jul 03, 2007 7:20 am    Post subject: Reply with quote

There's one crucial piece of info missing, what protocol should be used?

I've created a KM file based on the info posted, but the protocol selected is most likely incorrect...

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4730
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
johnsfine
Site Admin


Joined: 10 Aug 2003
Posts: 4767
Location: Bedford, MA

PostPosted: Tue Jul 03, 2007 7:57 am    Post subject: Reply with quote

I'm pretty sure the correct protocol is Proton.

I compared the (much smaller) list of OBC numbers I have for Daewoo TV's using Proton protocol, device 20 to the list of OBC numbers in this thread. They match.

I expect Daewoo brands TVs using other protocols, but I doubt that the device number and OBC numbers for those would match.

However, I also looked at the JP1 file:
Daewoo DP42S Device Upgrade.txt
It uses pid 005D.
Protocols.ini says Proton is pid 005C.

I don't have time today to look more closely at 005C and 005D to see if there is some aspect of this I'm misunderstanding (such as another protocol similar enough to Proton that DecodeIR reports Proton, but it isn't really).
Back to top
View user's profile Send private message Send e-mail Visit poster's website
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18406
Location: Chicago, IL

PostPosted: Tue Jul 03, 2007 9:01 am    Post subject: Reply with quote

What files do you have that list Protocol for Daewoo TVs? None of the 4 files in the file section use Proton.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18406
Location: Chicago, IL

PostPosted: Tue Jul 03, 2007 10:55 am    Post subject: Reply with quote

I found a Pronto CCF file for a Daewoo DTQ-2605FC which uses the Proton protocol with a device code of 20 and the OBCs mostly match the list above. I also compared this data to the TV/0624 setup code and it mostly matches also, so I have updated the KM file to use the Proton protocol.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
DarcyW



Joined: 03 Jul 2007
Posts: 3

PostPosted: Tue Jul 03, 2007 3:12 pm    Post subject: Reply with quote

Oh wow, thanks guys!

I did start playing around with it last night and IR was definitely reading it back from my 9960 as using the Proton protocol.
Back to top
View user's profile Send private message
ashishkra



Joined: 18 Apr 2014
Posts: 5
Location: India

PostPosted: Wed Apr 30, 2014 12:52 pm    Post subject: Help!!! Reply with quote

I have an old Daewoo DLM-32C5. The remote is broken and I am trying to replace it with URC 7960. The remote works with the code 1909 but I am unable to switch it to HDMI mode. The original remote had a button called Multimedia. I am trying to find the EFC (5 digits) which can enable this button.

Can someone help? Please let me know if you need to know something more..

Thanks
(A naive user to known nothing about remote controllers)
Back to top
View user's profile Send private message AIM Address
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6953
Location: Florida

PostPosted: Wed Apr 30, 2014 2:26 pm    Post subject: Re: Help!!! Reply with quote

ashishkra wrote:
I have an old Daewoo DLM-32C5. The remote is broken and I am trying to replace it with URC 7960. The remote works with the code 1909 but I am unable to switch it to HDMI mode. The original remote had a button called Multimedia. I am trying to find the EFC (5 digits) which can enable this button.

Can someone help? Please let me know if you need to know something more..

Thanks
(A naive user to known nothing about remote controllers)


Do the menu arrow buttons work with TV/1909?

These are some other daewoo input source buttons, try these

44042
44108
44114
44204
44276
45138

With remote set to TV mode
tap setup, (not hold)
type in the 5 digit number making sure the remote is pointed at the tv before
pressing the final digit.
repeat until you find the input/toggle



Some of the other EFC for the commands from this thread when used with the TV/1909

44150 T.RED
44278 T.GREEN
44054 T.YELLOW
44182 T.CYAN
44118 GUIDE
44064 S5
45216 S6
44128 S7
44256 S8
45056 S9
44160 S10
44096 S11
44224 S12
44220 Digital/Analog
44284 CASTEL POWER ON
44060 CASTEL POWER DOWN
44188 CASTEL ATV
44124 CASTEL DTV
44252 CASTEL PC
44140 REMOCON CALL
44244 FACTORY MODE
44068 CASTEL AV1
44196 CASTEL AV2
44132 CASTEL COMP1
44260 CASTEL COMP2
44036 CASTEL HDMI
44164 CASTEL SD_MS_MMC 1
44100 CASTEL HDMI 2
44228 CASTEL HDMI 3
44091 COMPONENT
44219 TV
44155 Color Temp
44283 CASTEL SD_MS_MMC 2
44035 S1
44163 S2
44099 S3
44227 S4
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Code Search (Closed) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central