View previous topic :: View next topic |
Author |
Message |
cweeks
Joined: 04 Jan 2006 Posts: 11
|
Posted: Mon Jun 25, 2007 1:46 pm Post subject: Casio XJ-350 DLP Projector Gap-576-1688-40? |
|
|
Hi all,
I have just acquired a Casio XJ-350 DLP Projector and IR decodes the signals as Gap-576-1688-40?
The below file contains two ir files with the learn't signals, my keymapping, and a pic of the remote.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4688
Cheers, Cam. |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Mon Jun 25, 2007 2:03 pm Post subject: |
|
|
Any other experts looking at this should be sure to adjust the column widths in IR.exe's display of the decodes so they can see the Misc. column.
This looks like the same timing and structure as NEC1 and Aiwa, except these have 24 device bits, where NEC1 has 16 and Aiwa has 26.
I half remember there being other protocols that have this structure with numbers of bits other than 16 or 26. But I can't find any at the moment.
Any expert should be able to find an Aiwa executor and tweak it a little to transform it into an executor for these signals. I don't have time to do that myself today. (NEC1 is from a more complicated executor, so that wouldn't be a valid base). Or just reinvent from scratch with PB.
Note that DecodeIR thinks the last byte is the OBC, when actually the last byte is a check byte equal to 256 minus the OBC. So until I add decodeir support for this protocol, you'll need to subtract the decoded OBC from 256 to get the correct OBC. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
|
Back to top |
|
|
cweeks
Joined: 04 Jan 2006 Posts: 11
|
Posted: Mon Jun 25, 2007 6:06 pm Post subject: |
|
|
You guys are good, I have tested your KM file Robman and it works perfectly. Many thanks for taking the time.
Will this protocol get integrated into IRDecode.dll in due time ? It that how things usually go?
Cheers, Cam. |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Mon Jun 25, 2007 6:54 pm Post subject: |
|
|
cweeks wrote: | Will this protocol get integrated into IRDecode.dll in due time ? It that how things usually go? |
The way things usually go is I put it off until I forget about it. I'll try to do better this time.
Anyone have a suggestion what this protocol should be named? |
|
Back to top |
|
|
Evan_s
Joined: 24 Mar 2007 Posts: 313
|
Posted: Mon Jun 25, 2007 7:00 pm Post subject: |
|
|
is there already a casio protocol? |
|
Back to top |
|
|
cweeks
Joined: 04 Jan 2006 Posts: 11
|
Posted: Mon Jun 25, 2007 7:14 pm Post subject: |
|
|
johnsfine wrote: | The way things usually go is I put it off until I forget about it. |
A man after my own heart , like your style.
Is "Casio" too obvious for the name ? I couldn't see one in there already. |
|
Back to top |
|
|
|