sony RM-VL600 advanced codes?

manuel · Post by **manuel** » Fri Jun 08, 2007 11:07 am

muchas gracias JOHN

im going to go to computer stores today after work i have a buddy that can help me out with building the cable!!
i found the instructions and pictures to go with it...

if my friend or myself cant build the cable than i will ask someone to lend me a credit card so i can order one online!!

after i have the cable if i have it.... what is the next step where am i going to get this download codes??? for the denon...
is there like a cd that i have to put in on the computer or is there a site that i can downloaded from?

thank you very much

manuel · Post by **manuel** » Fri Jun 08, 2007 11:26 am

never mine i found how to programmed once i have the cable..
you use the ER.EXE right? and just download the files there? am i correct

manuel · Post by **manuel** » Fri Jun 08, 2007 12:23 pm

is this the exact cable that i need to programmed my remote??
thats all i need right after that is just a matter of downloading the codes??
http://www.diygadget.com/store/jp1/jp1- ... rod_7.html
thanks a lot guys!!

Evan_s · Post by **Evan_s** » Fri Jun 08, 2007 6:31 pm

yup that should be the cable you need to program your remote. Once you've got that you just need to use Remote Master (RM) or Keymaster (KM) to build your upgrade and then IR to upload it to your remote.

kupakai · Post by **kupakai** » Fri Jun 08, 2007 6:52 pm

It might be a bit confusing since some of the upgrade files are based on an older version of the Denon Combo protocol and some are based on the Official Denon Combo protocol. In fact the list of advanced code you received is based on the old Denon Combo and if you used that (which is perfectly fine), you will need to add a protocol upgrade to your remote as well. That would be unnecessary if you used the Office Denon Combo, since that's built in to the 6131. However, the advanced code (or the EFC) will not be the same. Confused yet?

Anyway, to hopefully make it easier, I've made an upgrade file based on the codes you listed previously, and used the Official Denon protocol for it. You can find it here. Start with that; open it with Remotemaster, assign the functions to the buttons the way you want it, copy the resulting code to IR and upload it to your remote.

Post by **The Robman** » Fri Jun 08, 2007 10:17 pm

The list of advanced codes posted earlier were based on two seperate setup codes, audio/0004 and audio/0160, not either of the combos. As the OPs objective is to simply use the JP1 remote to program another remote, I don't think there's any need to complicate the matter by using a combo protocol. He should simply re-create those two setup codes in his remote and use the advanced codes from the earlier list.

audio/0004 = Denon, device code 12
https://www.hifi-remote.com/forums/dload ... le_id=4645

audio/0160 = Denon, device code 2
https://www.hifi-remote.com/forums/dload ... le_id=4646