|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
rjbutler
Joined: 25 Sep 2003 Posts: 1
|
Posted: Fri Sep 26, 2003 5:30 pm Post subject: Discrete off difficulties |
|
|
I have a URC-8810 that I've managed to set up exactly the way I want it with 2 DTivos, DVD, VCR, TV and Receiver. I really appreciate all the work people have done on the utilities and device files.
My final difficulty: I have a macro set up to power off everything using discrete off codes. I assigned discrete off (#204) to phantom1 on all of my devices, and it works on all except my Pioneer VSX-D810S receiver.
Discrete On (#208) works fine.
It works when I manually press setup-204. So I tried adding setup-2-0-4 explicitly to the macro instead of using a phantom key. It still doesn't work. Again, the sequence setup-2-0-8 works in a macro for discrete on.
Any ideas?
Thanks |
|
Back to top |
|
|
gjarboni Expert
Joined: 20 Sep 2003 Posts: 294 Location: Columbia, MD |
Posted: Fri Sep 26, 2003 11:38 pm Post subject: |
|
|
Well, if you have a discrete on code, then you can use Discrete On followed by power in your macro.
It seems like you're doing everything right. Maybe your receiver needs a delay inserted before the discrete off. Also, try assigning Discrete Off to a physical button and see if that works. That might help you see what is wrong.
Finally I don't believe setup-x-x-x works in macros in all remotes. I think it works in older remotes, but not the newer ones. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|