KATHREIN UFS 910 HDTV Sat (lirc data)

captaint · Post by **captaint** » Thu Apr 19, 2007 3:00 pm

Please excuse my newbie-question but is there a way to convert the following lirc file for use with JP1 interface (Dreambox Remote):

Code: Select all

begin remote

  name  RC660
  bits           16
  flags RCMM|CONST_LENGTH
  eps            10
  aeps          130

  header        500   185
  three         217   700
  two           240   560
  one           217   367
  zero          240   185
  ptrail        250
  pre_data_bits   16
  pre_data       0x2290
  gap          16777215
  toggle_bit      17
  min_repeat       0
  frequency    36000
  duty_cycle   50

      begin codes
          0                        0x0000
          1                        0x0001
          2                        0x0002
          3                        0x0003
          4                        0x0004
          5                        0x0005
          6                        0x0006
          7                        0x0007
          8                        0x0008
          9                        0x0009
          INFO                     0x000F
          OK                       0x005C
         STAND_BY                  0x000C
          MUTE                     0x000D
          CURSOR_RIGHT             0x005B
          CURSOR_LEFT              0x005A
          CURSOR_UP                0x0058
          CURSOR_DOWN              0x0059
          VOLUME_UP                0x0010
          VOLUME_DOWN              0x0011
          RED                      0x006D
          GREEN                    0x006E
          YELLOW                   0x006F
          BLUE                     0x0070
          EPG                      0x00CC
          EXIT                     0x0055
          MENU                     0x0054
          CHANNEL_UP               0x001E
          CHANNEL_DOWN             0x001F
          PLAY                     0x0038
          STOP                     0x0031
          RECORD                   0x0037
          PAUSE                    0x0039
          FASTFORWARD              0x0020
          REWIND                   0x0021
          TEXT                     0x003C
      end codes

end remote

this is from a kathrein ufs-910 hdtv sat receiver

thanks a lot
captaint

captaint · Post by **captaint** » Sun Apr 22, 2007 12:33 pm

nobody can help?

Post by **The Robman** » Sun Apr 22, 2007 6:12 pm

The format of this protocol sounds familiar but I don't recall which one it is. As it appears to be part of the RC6 family, I was hoping that John would jump in.

captaint · Post by **captaint** » Wed May 02, 2007 1:22 pm

really nobody an idea?

Post by **The Robman** » Wed May 02, 2007 2:02 pm

OK, I took a closer look at the data and it appears to be the Nokia32 protocol, so give this upgrade a try...

http://www.hifi-remote.com/forums/dload ... le_id=4536

captaint · Post by **captaint** » Sun May 06, 2007 2:48 pm

sorry for my late answer and thank you really much for trying to help me.
I have tried your km-file but it does not work for me. Do you perhaps have another idea?

thanks alot
captaint

Post by **The Robman** » Sun May 06, 2007 6:26 pm

Not really. Describe "does not work", do you mean the BIN file that you created wouldn't load, or do you mean that it loaded OK but didn't work the device.