View previous topic :: View next topic |
Author |
Message |
Feuerbard
Joined: 14 Jan 2005 Posts: 17
|
Posted: Fri Jan 14, 2005 6:22 am Post subject: Onkyo TX-SR702 remote - maybe a JP1 remote |
|
|
i have new onkyo receiver TX-SR702E (buying in Europe ) - it has new remote (learning and preprogrammed code include) , 3 battery supply and 6 pin pad under plastic cover , inside i find unknown RC1407611 CPU and Atmel 24C128 eeprom , JP1 pads are right interfacing (Reset , SDA , SCL , VDDu2 ) but no have Gnd and VDDu1 (pads are no connected)
what next i need to do - eeprom dump on my external programmer or something to detect JP 1 interface , i am old JP1 user (Kameleon 2133) |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Fri Jan 14, 2005 10:32 am Post subject: |
|
|
My gut feel is that this isn't a UEI remote. I found a picture of the remote here and it doesn't look like the sort of remote that UEI would make, plus I've never heard of them using a 16k EEPROM chip before.
However, if you 6 pads are aligned correctly, you could try soldering a 6-pin into place and see if you can download from it. If the pads are not aligned correctly, you could solder wires onto them with a 6-pin on the other end. If it's not a UEI remote, you may well be able to download the data, but it won't mean anything to you and you won't be able to edit using IR.exe.
_________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Wed Mar 21, 2007 6:42 pm; edited 1 time in total |
|
Back to top |
|
|
Feuerbard
Joined: 14 Jan 2005 Posts: 17
|
Posted: Sat Jan 15, 2005 6:02 am Post subject: |
|
|
thx for info , i try |
|
Back to top |
|
|
nevyn
Joined: 20 Mar 2007 Posts: 3
|
Posted: Wed Mar 21, 2007 5:56 pm Post subject: Any luck/failure what happened with this? |
|
|
Feuerbard wrote: | thx for info , i try |
Did you have any further luck with this?
I also have this remote and would love to be able to device upgrade it with the 1444 codes for mythtv and the power and input select codes for my projector Epson TW200 |
|
Back to top |
|
|
|