View previous topic :: View next topic |
Author |
Message |
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Sun Feb 11, 2007 11:25 am Post subject: |
|
|
Thanks folks. I don't have a single functional cable right now hence the reason I am not getting any jp1 work done now.
My USB cables do not work on my new laptop (Dell d620 with USB and serial only) since I can't get the driver (USBIODS) to install on XP Pro sp2. Not even Delcom is providing any help. It does recognize it as the right device but XP just won't install the drivers no matter which way I try. My next step on that is to reinstall XP but it is a company laptop.
My jp1.2 interface never worked consistently since it is one of Tommy's initial experiments with mini circuit boards.
I don't have a parallel port so those don't work.
And I gave my jp1.1 serial cable to my son.
Oh yeah, I just don't want to order a jp1.2 and mod it myself since I am just not that good at it. Pretty much a software guy. _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Feb 11, 2007 11:41 am Post subject: |
|
|
binky123 wrote: | To convert a JP1.2 cable to a JP1.x, you can solder a wire from IDC-4 to IDC-5. |
What about the missing components? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
binky123 Expert
Joined: 14 Feb 2004 Posts: 1292
|
Posted: Sun Feb 11, 2007 2:34 pm Post subject: |
|
|
The Robman wrote: | binky123 wrote: | To convert a JP1.2 cable to a JP1.x, you can solder a wire from IDC-4 to IDC-5. |
What about the missing components? |
Q1/D1/R1 aren't needed. |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Wed Feb 21, 2007 8:30 am Post subject: |
|
|
binky123 wrote: | The Robman wrote: | binky123 wrote: | To convert a JP1.2 cable to a JP1.x, you can solder a wire from IDC-4 to IDC-5. |
What about the missing components? |
Q1/D1/R1 aren't needed. |
I just received another jp1.2 serial cable from DIY and tried this jumper and it did not work as a jp1.1. Basically I located pin 1 and counted over to 4 and 5 so maybe I got the pins wrong. Maybe you can point me to the right pins on his PCB or a better way to figure it out. By the way, I didn't solder it and just used a clip between the two so that may have some impact. _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
binky123 Expert
Joined: 14 Feb 2004 Posts: 1292
|
Posted: Wed Feb 21, 2007 6:11 pm Post subject: |
|
|
I'm not familiar with his PCB. The numbering should be 1-2,3-4,5-6 so all odd or even pins are on one side. Pin 1 is +V. Pin 3 is GND.
Code: |
----
---| |---
| 5 3 1 |
| 6 4 2 |
------------
|
|
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Wed Feb 21, 2007 6:33 pm Post subject: |
|
|
Putting a jumper between 4 and 5 does not seem to work as a standard jp1 cable with either a 2116 or a 9960. It will also no longer work as a jp1.2 either.
I am using the lastest beta of IR and tried all different options for the interface.
I must be doing something wrong if that is suppossed to work. _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Wed Feb 21, 2007 6:37 pm Post subject: |
|
|
JP1.1 is NOT JP1. Those are three different interfaces, not two.
You can't add a jumper or any other few parts to turn a jp1.2 cable into a JP1. They are totally different designs.
JP1.1 and JP1.2 are related interfaces and one design can do both. |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Thu Feb 22, 2007 8:11 am Post subject: |
|
|
johnsfine wrote: | JP1.1 is NOT JP1. Those are three different interfaces, not two.
You can't add a jumper or any other few parts to turn a jp1.2 cable into a JP1. They are totally different designs.
JP1.1 and JP1.2 are related interfaces and one design can do both. |
Yeah, I guess I knew that. I was just so focused on getting some form of jp1 cable working for my 2116 etc. I had a bad brain check and was ready to try anything.
Now, does anyone have a jp1 serial they want to get rid of? _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Thu Feb 22, 2007 9:01 am Post subject: |
|
|
JP1 interface for universal remote control - $15.57 shipped _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Thu Feb 22, 2007 10:08 am Post subject: |
|
|
Thanks but isn't that the parallel printer port cable? I have a few of them but what I need is a serial cable.
I need the serial cable for jp1 (NOT jp1.1 or jp1.2) since I can't get the USB cable installed (driver won't install) and don't have a printer port just serial and USB. _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Thu Feb 22, 2007 11:16 am Post subject: |
|
|
OK. I lost the bit where you had no parallel port (that was many posts ago). I thought the problem was simply that you were (incorrectly) trying to use a JP1.x cable for a JP1 remote.
I've never seen any of the vendors selling the JP1 serial cable. I've never had one myself, and I'm with you on being unable to make one for myself.
Fortunately my new desktops still came with parallel ports, and although my new laptops (really my kids' but my son lets me use his ) don't have parallel ports, I have an old laptop (running WinME, no less) that is just fine for JP1-ing - so until it dies completely, I'm OK.
Good luck getting (re)connected.
As I read the boards here, it is my perception that the JP1 USB cable is far from a reliable interface. I wonder if there still needs to be some tweak to that design. I read of more probelms with that thing than anything I've ever seen with the simple parallel interface. (...or is it really simply a case of Bill Gates outsmarting all who may need to install that mischievous Delcom driver?) _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
jherrick JP1 Vendor
Joined: 31 Dec 2003 Posts: 225 Location: South Berwick, ME |
Posted: Thu Feb 22, 2007 6:44 pm Post subject: |
|
|
Nils,
I am placing an order from Mouser anyway, and I can order the parts for that Serial jp1 cable (I found Tommy's design on the Yahoo site). I would assemble that and test it for you if you want. Just PM me to let me know if you are still interested.
Jim |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Thu Feb 22, 2007 7:44 pm Post subject: |
|
|
jherrick wrote: | Nils,
I am placing an order from Mouser anyway, and I can order the parts for that Serial jp1 cable (I found Tommy's design on the Yahoo site). I would assemble that and test it for you if you want. Just PM me to let me know if you are still interested.
Jim |
Thanks for the offer. I did PM you.
I am also gonna beat this USB driver thing somehow so it will not only help me but help the few others that still have had the same problem. _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
|