Symphonic SC-319C

Joe O · Post by **Joe O** » Tue Feb 20, 2007 5:13 pm

HI.

Does anyone have a device upgrade for the Symphonic SC-319C. It is a TV/VCR combo.

Than you.

Post by **ElizabethD** » Tue Feb 20, 2007 8:24 pm

Please READ BEFORE POSTING or your post will be DELETED!
http://www.hifi-remote.com/forums/viewtopic.php?t=49

Some Symphonic upgrade, but this one is TV/DVD combo
http://www.hifi-remote.com/forums/dload ... le_id=1971

Joe O · Post by **Joe O** » Wed Feb 21, 2007 3:04 am

1. Device : Symphonic SC-319C
2:Type of device: TV/VCR combo
3. Year: Don't know
4: JP1/UEI Remote Model: URC-8910
5: Do you have a JP1 cable: Yes
6:Still have original remote: No
7:Checked the file website: Yes
8: Checked Pronto file section: Yes
9: Partially working setup code: No
10: Learning remote question: n/a

I am doing this as a surprise gift for a friend. I would like to have a reasonable chance of success before turning remote over.

Post by **ElizabethD** » Wed Feb 21, 2007 3:14 pm

Googling results: Made in 2002, (Funai Corp?)
Tiny description: http://www.symphonic.us/products/prior.aspx

Possible setup codes under Symphonic
TV/VCR 0000
TV might be 0180,0171
VCR 0000
http://www.hifi-remote.com/ofa/codes-vcr.shtml#vcrc
http://www.hifi-remote.com/cgi-bin2/ueic.cgi?VCR_0000
http://www.hifi-remote.com/cgi-bin2/ueic.cgi?TV_0000
But it could also be under Daewoo, Goldstar, Magnasonic, Nikko

8910 setup codes are here
http://www.ofausa.com/list_codes.php?db ... URC%208910
but I think it's a wild goose chase to nail down what might work.

Can you borrow the OEM remote from girlfriend and learn some/all TV and VCR buttons?
Perhaps UEI can tell you for sure or send you the .wav file?

Joe O · Post by **Joe O** » Wed Feb 21, 2007 3:50 pm

HI Liz,

Thank you very much for all the info and your work.

At the One For All site I clicked on the "get manual and codes icon"

For the Funai combo I get 0000. For the Symphonic I get 0000 0563.

I sent an email requesting the codes to program using JP1. No answer yet. It will probably be the same as you sent.

The old remote is broken and does not work at all. I would have learned all the codes if I could.

I will let you know if I get anymore info.

Once again thankyou.

Post by **The Robman** » Sun Feb 25, 2007 2:43 pm

I don't know the model number of the unit, but I used VCR/0000 to work a Symphonic TV/VCR combo this week. This is a "Sony" code, so you can use codes from the Sony JP1 site to fill in any blanks...

http://www.hifi-remote.com/sony/

Joe O · Post by **Joe O** » Sun Feb 25, 2007 3:42 pm

Hi Rob,

Thanks for your input. I won't be able to test for a week or so. The person who is getting the remote is on vacation.