View previous topic :: View next topic |
Author |
Message |
theymademedoit
Joined: 17 Jan 2007 Posts: 1
|
Posted: Wed Jan 17, 2007 9:06 am Post subject: Loose connections? |
|
|
Hi,
I have a Technics seperates system and I have a right and left RCA lead going into the amp with the other end going into my DVD player in order to allow a bit more volume when watching DVD's.
I had not used it for a few weeks and when I plugged it all back in there is hardly any sound coming out of the speakers, but if I wiggle and move the RCA lead at the amp, the sound is full, I then have to strategically twist and place them and creep away from the unit to keep the sound!
The next time I turn it on I have to do it again!!!!
Anay ideas what I can do or what is causing it?
Regards,
Alan |
|
Back to top |
|
|
zaphod7501
Joined: 02 Aug 2004 Posts: 534 Location: Peoria Illinois |
Posted: Wed Jan 17, 2007 11:04 pm Post subject: |
|
|
There's a number of possibilities.
Solder connections on either device.
Corroded terminals.
Bad cables.
I would try reversing the cables, end for end.
Try different cables. The bigger and heavier the cable, the more likely to break internally. _________________ Just call me Zaphod (or Steve) --- I never should have started using numbers in a screen name but I just can't stop now. |
|
Back to top |
|
|
|