JP1 Remotes

The Robman · Posted: Sun Jan 14, 2007 1:21 pm Post subject:

Take a look at the OBCs that you calculated, they are all in the 200+ range, whereas the ones I calculated are all in the lower digits. The reason for this is that you have grabbed the "complement" bits rather than the real OBC bits. To convert your OBCs into the real OBCs you should subtract them from 255.

I have done this here...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4073
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

Mor@ · Posted: Sun Jan 14, 2007 4:13 pm Post subject:

Yep, right again.

Thanks for all the help.

I guess I'll manage the remaining buttons now and will post the upgrade as soon as I'm done.

Marcus.

The Robman · Posted: Sun Jan 14, 2007 6:43 pm Post subject:

One note about your upgrade, I notice that you have been putting the real button names (from the OEM remote) in the Notes column, the correct procedure should be to put these names in the Functions column (the Notes column is just there in case you want to explain what a button with an unusual name does). Then in the Buttons sheet, you would select these OEM names and assign them to the physical buttons on your JP1 remote. Take a look at the upgrade that I just posted to get the idea.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

Mor@ · Posted: Mon Jan 15, 2007 4:20 am Post subject:

Ok Rob, that's understood.