View previous topic :: View next topic |
Author |
Message |
dicator
Joined: 05 Jan 2007 Posts: 4
|
Posted: Fri Jan 05, 2007 4:48 am Post subject: Kreatel 1510 stb IR codes for Slingbox |
|
|
Hi
I have set up nice Slingbox system with Kreatel 1510 stb, but as the topic says I cannot control that box via internet because I don't have right codes.
I have googled like lunatic and I find couple of posts from this forum also, but no one is solving my problem.
http://www.hifi-remote.com/forums/viewtopic.php?t=6716
This was closest to my case and by my understanding 1760 stb uses same codes as my box.
I would be very grateful if someone could help me with this.
Regards
DiCator |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Jan 05, 2007 8:09 am Post subject: Re: Kreatel 1510 stb IR codes for Slingbox |
|
|
What do you mean by "no one is solving my problem"? The thread that you found contains the answer, specifically if you look at this post you'll see that there's a link to the Kreatel upgrade file, which the Slingbox user who started the thread has confirmed works. What more do you need? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
dicator
Joined: 05 Jan 2007 Posts: 4
|
Posted: Mon Jan 08, 2007 3:28 am Post subject: |
|
|
I wasn't very clear in what I said..
From the beginning as I have understood these codes,files and upgrade things needs some hardware (wire) to apply those things to the Slingbox. Am I right? So my question is how can I take those codes in action with slingplayer application? |
|
Back to top |
|
|
zaphod7501
Joined: 02 Aug 2004 Posts: 534 Location: Peoria Illinois |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Jan 08, 2007 10:19 am Post subject: |
|
|
dicator wrote: | I wasn't very clear in what I said..
From the beginning as I have understood these codes,files and upgrade things needs some hardware (wire) to apply those things to the Slingbox. Am I right? So my question is how can I take those codes in action with slingplayer application? |
You don't need a wire (aka "JP1 Cable") or any hardware to use JP1 upgrades with the Slingbox.
If you go to the top of this forum you'll see a sticky thread entitled Using JP1 with the Slingbox, as the title of this sticky thread might (hopefully) imply, this is a very good place to start with regards to using JP1 with the Slingbox. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
dicator
Joined: 05 Jan 2007 Posts: 4
|
Posted: Tue Jan 09, 2007 2:32 am Post subject: |
|
|
Ok thanks for your help so far..
I have now imported that Kreatel KM file in RM and I can find from devices Slingbox with PL and JU chips, but I think mine is RV type or some other (IR Blaster version 4)..
So my question is where I can find RDF files to that RV or other?
Thank you for you patience so far |
|
Back to top |
|
|
dicator
Joined: 05 Jan 2007 Posts: 4
|
|
Back to top |
|
|
|