View previous topic :: View next topic |
Author |
Message |
MJ
Joined: 28 Sep 2003 Posts: 25
|
Posted: Sat Dec 06, 2003 7:24 pm Post subject: 8910x Should I be able to get the backlight to come on? |
|
|
I want to use the backlight as confirmation of an action. (Make it flash...) I have been unable to trigger the backlight by calling the light button from a macro. Is there a way to trigger the backlight without actually pushing the button?
MJ |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21248 Location: Chicago, IL |
Posted: Sat Dec 06, 2003 9:39 pm Post subject: |
|
|
The LIGHT button doesn't turn the light on, per se, it turns on the light function. If the light function is current off and you press the light button, the backlight will illuminate, and if the light function is currently on and you press the light button, the light function will turn off and the backlight will also stay dark.
When you program macros on the remote itself, you cannot include the light button, but you can include it when you program macros using IR.exe, however, I don't think this will get you your desired results.
Your visual confirmation that the buttons are being pressed is both the red LED lighting up and the IR icon displaying, once per macro step. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Sat Dec 06, 2003 10:00 pm Post subject: |
|
|
How about if the macro contained two light functions in a row? Then, no matter what state the light is in, it would turn on. And as a bonus, the light function state would be returned to its previous setting. _________________ -Steve
Beginner's Guide
CodeSearchFAQ
JP1Files |
|
Back to top |
|
|
xgamer123
Joined: 12 Dec 2003 Posts: 48
|
Posted: Wed Dec 17, 2003 2:15 pm Post subject: |
|
|
This topic leading me a good idea. I want to modify the PCB's circuit for connect original LED signal to drive on all backlight LED. It could be not difficult to have done it.
I don't want to open my remote at the moment. If anyone have interest, please try it and post the result. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21248 Location: Chicago, IL |
Posted: Wed Dec 17, 2003 2:35 pm Post subject: |
|
|
usblipitor wrote: | How about if the macro contained two light functions in a row? Then, no matter what state the light is in, it would turn on. And as a bonus, the light function state would be returned to its previous setting. |
If the backlight function was off, the first press would turn the light on and the second press would turn it off, so the backlight would flash.
If the backlight function was on, the first press would turn it off and the second press would turn it on and leave it on. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|