JP1 Remotes

16-2116 · Joined: 22 Dec 2006 Posts: 4

I'm sure this is the wrong place to post this, because I'm such a newbie, but I thought someone might benefit from this. Below is a list of the codes that work with the LiteOn DVD Recorder LVW-1107HC1.

--Doug

The Robman · Posted: Fri Dec 22, 2006 10:28 pm Post subject:

You need to know what setup codes the EFCs go with in order for them to be useful.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

whompus · Joined: 27 Apr 2005 Posts: 540

That's jvc protocol 0034, The same as the ilo's and several liteon's in the file area. Can be key moved to fit the 0623 code for any non jp1 users.

16-2116 · Joined: 22 Dec 2006 Posts: 4

Oh, thanks...I used Setup Code 0017.

The Robman · Posted: Sat Dec 23, 2006 12:13 am Post subject:

16-2116 · Joined: 22 Dec 2006 Posts: 4

It's a DVD/0017 setup code, and I loaded it as an upgrade. At least, 0017 is listed on the Upgrades tab. But I programmed them in as keymoves.

The Robman · Posted: Sat Dec 23, 2006 10:25 am Post subject:

The setup code number used in JP1 upgrade files is meaningless as it's just a random number chosen by the person who created the upgrade file. If you used an upgrade as the basis for these codes, could you please post a link to it.

For yourself, rather than re-programming all the buttons using keymoves, you could just have re-worked the upgrade file itself.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

16-2116 · Joined: 22 Dec 2006 Posts: 4

Like I said, I'm a newbie. If I could figure out how to do that, I would. (groan, sorry)

The Robman · Posted: Sat Dec 23, 2006 11:23 pm Post subject:

OK, let's do a step-by-step then. You say that you added the code as an upgrade, where did you get the upgrade from? I'm guessing it was here in the file section. Do you think you could re-trace your steps and find the file again? If you can, when you get there, highlight the page address (ie, the line at the top of the page that starts with http://www.hifi-remote.com ) and do a "copy" (ie, CNTL-C) then come back to this thread and do a "paste" (ie, CNTL-V) to paste the link here for us. THen we'll be able to see what the "0017" code that you used looks like.

Does that help?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!