View previous topic :: View next topic |
Author |
Message |
gstrickland
Joined: 03 Jan 2004 Posts: 43 Location: Tulsa, OK |
Posted: Sun Dec 17, 2006 1:33 pm Post subject: Volume Punch Through |
|
|
EDIT: Ignore this thread. This thread is of no use to anyone. I solved my problem, by putting the correct TV code in for my system. I had been using a leftover Sony code on my Sanyo tv. (FWIW... I switched from a JP1 remote to a Harmony about two yrs ago... now I'm switching back.)
Sorry to waste everyone's time.
===============================
Could someone please point out my mistake?
I am not getting Volume Punch Through when in DVD mode on my 15-2116, despite the following:
MySystemVolumeDevice = TV
VPTStatus = on
VPTDevice = tv
TVVPT = on
VCRVPT = on
CABVPT = on
SATVPT = on
CDVPT = on
DVDVPT = on
AUXVPT = on
AudioVPT = on
Doesn't the above mean that I volume up/down should control the tv volume regardless of the mode I am in? What am I overlooking?[/b] _________________ Gray Strickland
Curmudgeon
Tulsa, OK
Last edited by gstrickland on Sun Dec 17, 2006 4:37 pm; edited 1 time in total |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Dec 17, 2006 1:55 pm Post subject: |
|
|
Do you have a DVD code assigned to the DVD button? If you have a mis-match (eg, you have a SAT code assigned to the DVD button, etc) VPT won't work. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
gstrickland
Joined: 03 Jan 2004 Posts: 43 Location: Tulsa, OK |
Posted: Sun Dec 17, 2006 2:58 pm Post subject: |
|
|
I have DVD set to type DVD and code 0539, which is one of the two codes for Philips DVD players (the other being 0503). I have a Philips model DVP-642 DVD player. _________________ Gray Strickland
Curmudgeon
Tulsa, OK |
|
Back to top |
|
|
gstrickland
Joined: 03 Jan 2004 Posts: 43 Location: Tulsa, OK |
Posted: Sun Dec 17, 2006 3:46 pm Post subject: |
|
|
On further examination...
I'm not getting VPT in any mode except TV and MySystem modes. In case it matters, here are my primary settings:
TV = TV mode = 0000 (Sanyo HT-30744)
VCR = VCR mode = 0032 (unused)
CBL = CBL mode = 0476 (unused)
SAT = SAT mode = 0392 (unused)
CD = CD mode = 0072 (unused)
DVD = DVD mode = 0539 (Philips DVP-642)
AUX = VCR mode = 0614 (ReplayTV 5040)
AUDIO = RCVR mode = 1074 (JVC RX-809V)
MYSYS = TV mode = 0047
EDIT: Ignore this thread. This thread is of no use to anyone. I solved my problem, by putting the correct TV code in for my system. I had been using a leftover Sony code on my Sanyo tv. (FWIW... I switched from a JP1 remote to a Harmony about two yrs ago... now I'm switching back.)
Sorry to waste everyone's time. _________________ Gray Strickland
Curmudgeon
Tulsa, OK |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Sun Dec 17, 2006 5:15 pm Post subject: |
|
|
gstrickland wrote: | MYSYS = TV mode = 0047 | Are you using TV/0047 for anything or is the Sony TV/0000 assigned to TV your TV device? If you're just using the Sony, try changing MYSYS to TV/0000 and see what happens. _________________ Mark |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Sun Dec 17, 2006 5:23 pm Post subject: |
|
|
Mark, see the edited FIRST post - he's solved his problem. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
|