View previous topic :: View next topic |
Author |
Message |
Chuck_IV
Joined: 14 Dec 2003 Posts: 54 Location: Connecticut |
Posted: Sun Dec 14, 2003 2:32 pm Post subject: Sony Discrete ON/OFF with RS 2117 using Extender2... |
|
|
I cannot, for the life of me, get discrete ON/OFF programmed for my Sony 635 receiver, using extender2. I am using RCVR code 1158 on the AUX, to control the receiver, with out issue, but I want to make it so Power turns the power on ONLY, and shift-power to turn the power off ONLY.
I have a learned code that works, when not using the extender. It is:
Protocol: Sony12
Device: 16
OBC: 46 for On 47 for OFF
Hex 74 or 75 for On and F4 or F5 for OFF
Now, based on what I have read, based on the Sony12 and device 16, it is using the hex 74 for ON and F4 for OFF. So I figured I would use a keymove command to get this done with extender2. So my key moves went like this:
AUX Power = AUX RCVR 1158 $74
AUX Shift-Power = AUX RCVR 1158 $F4
When I use this, nothing happens. The power does not go on/off. I tried the hex 75 and F5 for on/off, and that didn't work.
All I am looking to do is get a discrete code for ON to the power button and Off to the shift power of the AUX(receiver) buttons.
What do I need to do, to do this? Am I using the wrong code for 1158?
Thanx. |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Sun Dec 14, 2003 2:44 pm Post subject: |
|
|
The 1158 code is a combo that uses 2-byte commands. Based on your info, try these Hex Cmds for the Key Moves:
On: 74 08
Off: F4 08 _________________ Mark |
|
Back to top |
|
|
Chuck_IV
Joined: 14 Dec 2003 Posts: 54 Location: Connecticut |
Posted: Sun Dec 14, 2003 3:50 pm Post subject: |
|
|
Mark Pierson wrote: | The 1158 code is a combo that uses 2-byte commands. Based on your info, try these Hex Cmds for the Key Moves:
On: 74 08
Off: F4 08 |
OMG! I can't believe I didn't try that. Thank You! All my other key moves ended with that same 08, why the heck didn't I add that here
I ended up getting it working using keymap-master to create an upgrade file, but the 08 method is a heck of a lot easier.
Oh well, my forehead is a bit flatter from smashing it against the wall, but, hey it works now
Thanx again.
BTW, I noticed you're in CT too... enjoying the snow? |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Sun Dec 14, 2003 4:45 pm Post subject: |
|
|
Chuck_IV wrote: | Oh well, my forehead is a bit flatter from smashing it against the wall, but, hey it works now |
How's the wall doing?
Quote: | BTW, I noticed you're in CT too... enjoying the snow? |
I wouldn't use the word enjoying... especially since it's going to change over to rain soon. Ought to make a nice mess! _________________ Mark |
|
Back to top |
|
|
Chuck_IV
Joined: 14 Dec 2003 Posts: 54 Location: Connecticut |
Posted: Sun Dec 14, 2003 5:19 pm Post subject: |
|
|
Yea, it's gonna be ugly later, when it starts raining.
I have 2 more keys I am having issues with. They are 2 learned keys from my Hughes HTL-HD Directv receiver. This receiver is fairly new. I am using setup code 1749.
The keys show as follows:
Protocol: NEC1
Device: 12
Sub-Device: 251
OBC: 47
Hex: 0B
EFC: 090
and
Protocol: NEC1
Device: 12
Sub-Device: 251
OBC: 49
Hex: 73
EFC: 153
I've tried just the 0B abd 73 codes in key movers but nothing.
Thanx for the help. |
|
Back to top |
|
|
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
Posted: Sun Dec 14, 2003 5:27 pm Post subject: |
|
|
It must be something basic. Those should work. Did you try just using the EFC's? _________________ -Jon |
|
Back to top |
|
|
Chuck_IV
Joined: 14 Dec 2003 Posts: 54 Location: Connecticut |
Posted: Sun Dec 14, 2003 5:41 pm Post subject: |
|
|
jon_armstrong wrote: | It must be something basic. Those should work. Did you try just using the EFC's? |
Yea, I tried it both ways. I dunno. It doesn't want to work and to top it off the first one, 090 locks the remote, to the point, I have to remove the batteries. |
|
Back to top |
|
|
Chuck_IV
Joined: 14 Dec 2003 Posts: 54 Location: Connecticut |
Posted: Sun Dec 14, 2003 6:07 pm Post subject: |
|
|
Yep, it was something stupid. I was choosing CBL as the device(since I was using the CBL key to control by 2nd satellite receiver), BUT this is a satellite receiver, so I should have used the SAT device, which did work. again. |
|
Back to top |
|
|
|