View previous topic :: View next topic |
Author |
Message |
dvbspider
Joined: 15 May 2006 Posts: 28
|
Posted: Wed Jun 07, 2006 3:16 pm Post subject: Spacestar 700-500 need help |
|
|
I found on code section the spacestar 500 it in txt file, how did I change to use to SLINGBOX..
do I have to chanGe to BIN file, ??? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
|
Back to top |
|
|
dvbspider
Joined: 15 May 2006 Posts: 28
|
Posted: Thu Jun 08, 2006 10:11 pm Post subject: need help.. |
|
|
I found the way using RemoteMaster I, was able to make a rdf file with the text code from remote I found here..
so my question is how do I make a bin file from a rdf file.
I have been look over all remotemaster, but I dont found nothing.
I fallow the readme file from RM , but I think I am to slow, to get this..
please if some know how to do this I, will provide the rdf file,,
thanks. |
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Thu Jun 08, 2006 10:57 pm Post subject: Re: need help.. |
|
|
dvbspider wrote: | I found the way using RemoteMaster I, was able to make a rdf file with the text code from remote I found here..
so my question is how do I make a bin file |
Here's your step by step...
1. follow the link in my last post.
2. click on the first link on that page (under the heading "I have written an article that describes the whole process here")
3. Follow the step by step on that page (paying particular attention to step 10)
4. You can no longer edit the SBAV.cfg file as described in that article, so you should follow Step 4 in the second article linked to. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
dvbspider
Joined: 15 May 2006 Posts: 28
|
Posted: Fri Jun 09, 2006 9:00 am Post subject: help.. |
|
|
Robman
I try to go to setp but it dont show me nothing how to make the bin file for slingbox |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Jun 09, 2006 9:52 am Post subject: |
|
|
dvbspider wrote: | Robman. I try to go to setp but it dont show me nothing how to make the bin file for slingbox |
Really? We must be looking at different sites. I told you to look at step 10 from the first page which reads "Select "Advanced" menu option, then select "Export Binary Upgrade". This will give you a windows pop-up screen where you can select where you want to save the binary file, you should navigate to the SBAV folder in your Sling Player directory and save it there.", that sure sounds like something about how to make the bin file to me.
The second link takes you to an article called "Creating Your Own Remote Bin File Directly From Your Remote Control!", which again sure sounds like it's going to have some info about bin files and sure enough, step 3.15 reads "Click Advanced | Export Binary Upgrade... -> save the file to your SBAV directory.".
It sure sounds to me like you're not reading the articles that I'm pointing you to, which is disappointing. Given that I wrote the first of those two articles, if I were to repeat the instructions here I don't imagine that they will be any clearer than the articles themselves, so I don't think we can really help you much here. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Fri Jun 09, 2006 9:57 am Post subject: |
|
|
dvb, you have to explain with a lot more detail what step of the process you are having trouble with.
Have you read the articles linked by Rob above?
Have you made a rmdu file in RM?
Have you created a bin file from RM? (The process is described in the articles referenced above, but if you cannot figure it out, it is in RM's "Advanced>Export Binary Upgrade" drop-down menu selection)
Have you then added that newly-created BIN file as described in the articles liked?
If you don't say what you HAVE done and at what point you CANNOT do what the readme says, it's hard to give you any further help. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
dvbspider
Joined: 15 May 2006 Posts: 28
|
Posted: Fri Jun 09, 2006 12:09 pm Post subject: help |
|
|
Capn Trips wrote: | dvb, you have to explain with a lot more detail what step of the process you are having trouble with.
Have you read the articles linked by Rob above?
Have you made a rmdu file in RM?
Have you created a bin file from RM? (The process is described in the articles referenced above, but if you cannot figure it out, it is in RM's "Advanced>Export Binary Upgrade" drop-down menu selection)
Have you then added that newly-created BIN file as described in the articles liked?
If you don't say what you HAVE done and at what point you CANNOT do what the readme says, it's hard to give you any further help. |
Have you read the articles linked by Rob above?
Yes
Have you made a rmdu file in RM?
yes
Have you created a bin file from RM? (The process is described in the articles referenced above, but if you cannot figure it out, it is in RM's "Advanced>Export Binary Upgrade" drop-down menu selection)
Have you then added that newly-created BIN file as described in the articles liked?
here i got the problem,,
I just have create the rmdu ,, so my problem is when I go to Advanced >Export binary Upgrade --I dont see any bin file create, the only file a creat is rmdu.
My question is how to create a rmdu to bin , please can some one make setp by setp.?????
becuase on the link below it only show you how to export the bin file,, I undertand that part very clear... |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Jun 09, 2006 1:01 pm Post subject: Re: help |
|
|
dvbspider wrote: | I just have create the rmdu ,, so my problem is when I go to Advanced >Export binary Upgrade --I dont see any bin file create, the only file a creat is rmdu.
My question is how to create a rmdu to bin , please can some one make setp by setp.?????
becuase on the link below it only show you how to export the bin file,, I undertand that part very clear... |
You CREATE a bin file by USING the "Export binary upgrade" function, try it, you'll see. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
dvbspider
Joined: 15 May 2006 Posts: 28
|
Posted: Fri Jun 09, 2006 1:47 pm Post subject: Re: help |
|
|
The Robman wrote: | dvbspider wrote: | I just have create the rmdu ,, so my problem is when I go to Advanced >Export binary Upgrade --I dont see any bin file create, the only file a creat is rmdu.
My question is how to create a rmdu to bin , please can some one make setp by setp.?????
becuase on the link below it only show you how to export the bin file,, I undertand that part very clear... |
You CREATE a bin file by USING the "Export binary upgrade" function, try it, you'll see. |
what I mean when i click on Advanced >Export binary Upgrade, is no BIN file there and no rmdu file... It won't show the rmdu |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Jun 09, 2006 1:59 pm Post subject: |
|
|
You seem to be getting tripped up on the wording. The export function is the function that you use to ***CREATE*** the binary upgrade, so of course it's not there now because you haven't created it yet.
So pretend that the "Export binary upgrade" function is really called "Create binary upgrade" and see if that helps. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
dvbspider
Joined: 15 May 2006 Posts: 28
|
Posted: Fri Jun 09, 2006 2:36 pm Post subject: |
|
|
The Robman wrote: | You seem to be getting tripped up on the wording. The export function is the function that you use to ***CREATE*** the binary upgrade, so of course it's not there now because you haven't created it yet.
So pretend that the "Export binary upgrade" function is really called "Create binary upgrade" and see if that helps. |
Robman when i click :Advanced it gives 4 options
Export binary is not dark letters is light letters I can click it.
the only I can click is :
import raw upgrade
import binary upgrade |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Jun 09, 2006 3:22 pm Post subject: |
|
|
That implies that you haven't selected the Slingbox as your "remote". _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
dvbspider
Joined: 15 May 2006 Posts: 28
|
Posted: Fri Jun 09, 2006 5:13 pm Post subject: |
|
|
The Robman wrote: | That implies that you haven't selected the Slingbox as your "remote". |
And where a select Slingbox as my remote, I dont see it at RM |
|
Back to top |
|
|
|