JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

discrete code for sony 200 disc cd changer?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
georgethemechanic



Joined: 26 Feb 2006
Posts: 3

PostPosted: Sun Mar 05, 2006 12:58 pm    Post subject: discrete code for sony 200 disc cd changer? Reply with quote

If it's possible, I would like to get the discrete on/off advanced code for my Sony 200 disc CD changer when the remote control "channel" switch on the back of the unit is set to 2 or 3.

My remote is a urc-8910.

With the remote control switch on the changer set to "channel" 1, CD setup code 0000 with advanced codes 113 /on and 109 /off work normally.

Is there is an advanced code for setup code CD 0000 that will do a discrete on/off with the "channel" switch on the back of the changer set to 2 or 3?

Do I have to use the JP1 cable and IR.exe to do what I want?

Thanks!
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18554
Location: Chicago, IL

PostPosted: Sun Mar 05, 2006 1:57 pm    Post subject: Reply with quote

Check out this page...
http://www.hifi-remote.com/sony/Sony_cd.htm

From that page you'll see that CD/0000 corresponds to Sony device code 17, which is CD1 on your changer. CD2 is Sony device code 57 and CD3 is Sony device code 81.

To make your URC-8910 work the changer in either CD2 or CD3 mode, you would need to create a new upgrade using the correct device code. The good news is that all three modes use the same EFCs, so all you would need to do is download a similar upgrade and change the device code.

Of course, you do need to be a JP1 user to do this.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
georgethemechanic



Joined: 26 Feb 2006
Posts: 3

PostPosted: Sun Mar 05, 2006 7:07 pm    Post subject: Reply with quote

Thanks!

I saw the Sony page but I don't know enough about the subject to make sense of it. With your hints I think I can figure it out without taking to much time for what is admittedly a trivial detail, but a detail I would like to resolve. Thanks again.
Back to top
View user's profile Send private message
georgethemechanic



Joined: 26 Feb 2006
Posts: 3

PostPosted: Mon Mar 06, 2006 5:56 pm    Post subject: Reply with quote

WOW!!!

That was easier than I thought it would be and worked perfect! Thanks a bunch. Your advice was very helpful!
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18554
Location: Chicago, IL

PostPosted: Mon Mar 06, 2006 7:22 pm    Post subject: Reply with quote

That's what JP1 is all about! Smile
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central