View previous topic :: View next topic |
Author |
Message |
WesleyPipes
Joined: 17 Jan 2006 Posts: 5
|
Posted: Wed Jan 18, 2006 5:10 pm Post subject: Help with Pronto Hex |
|
|
So after reading guides for beginners and still having no luck, I am stuck with what to do here.
I found these Pronto Hex codes, but I could not figure out what to do with them since they were not in a file. I tried to use IRTool with them, but I couldnt figure out how to use it all.
An example of one of these is the Volume + Hex code:
0000 006d 0022 0002 0155 00aa 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0040 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0040 0016 0016 0016 0016 0016 0016 0016 0016 0016 0040 0016 0016 0016 0040 0016 0016 0016 0040 0016 0040 0016 0040 0016 0040 0016 0016 0016 0040 0016 0016 0016 0040 0016 0016 0016 06ef 0155 0055 0016 0e34
So if anyone could please help me get started in the right direction, it would be much appreciated.
Thanks |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21240 Location: Chicago, IL |
Posted: Wed Jan 18, 2006 6:54 pm Post subject: |
|
|
You're lucky, that hex uses the NEC1 protocol, which is the best supported protocol of all the protocols out there. The main device code is 64 and the sub-device code is 64. The OBC for this particular function is 168.
To create an upgrade for this you would fire up either KM or RM, select the NEC1 protocol, enter 64 in both device code fields, then go to the Functions sheet and start entering the OBCs for the functions.
The following doc might be helpful:
http://www.hifi-remote.com/jp1/help/ _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
WesleyPipes
Joined: 17 Jan 2006 Posts: 5
|
Posted: Wed Jan 18, 2006 11:21 pm Post subject: |
|
|
Thanks guys. I swear I used IR Tool before and it didn't give me the message box with the info in it, but now it works.
All of it is working, except the power button only turns the unit off...haha. |
|
Back to top |
|
|
|