URC 7560/7562 Menu Mode problems

This is the JP1 beginners forum. There's no such thing as a stupid question in here, so post away, but this forum is just for JP1 users and people considering JP1, non-JP1 users please use the appropriate forum above!

Moderator: Moderators

Post Reply
squirrelz
Posts: 4
Joined: Thu Nov 27, 2003 3:32 am
Location: Sheffield, UK

URC 7560/7562 Menu Mode problems

Post by squirrelz »

My first posting so please be gentle :wink:

I've got a couple of One4All 6's (7560 and 7562), and they've been fine with normal devices, but we've recently got a Pace 2000 digital cable STB.

I bought a JP1 cable kit (which worked first time when I built it up) to download the necessary protocol upgrade to the remotes (as I couldn't get the internet download to work).

To cut the waffle short, it all works fine, but the wife can't get to grips with the "menu mode" so I need to turn it off and remap the Mute and AV buttons to perform the Select and Exit functions all the time.

I've tried this, but they just don't do anything, so I'm doing something wrong somewhere as I've seen postings from people saying that they've done exactle this and it works.

I've got the extender loaded and it seems to work ok, I can turn Menu mode off, but the 2 keys don't do anything when I've mapped them to the hex codes for the functions I want. They do work fine when menu mode is turned on and active.

Help!!!
Top
damir
Posts: 102
Joined: Wed Oct 01, 2003 9:32 am
Location: Croatia

Post by damir »

In KM on Buttons sheet assign Select function to Mute and Enter buttons,
and assign Exit function to AV and Exit buttons.
Top
squirrelz
Posts: 4
Joined: Thu Nov 27, 2003 3:32 am
Location: Sheffield, UK

Post by squirrelz »

I've not managed to get all the data out of IR and into KM, are there any guides on how to do this?
Top
Post Reply

Return to “JP1 - Beginners”