Newbie: MX-500+8811+jp1+nokia 9802

[MusenKba]

Hello

I can't get my mx-500 to send to my sat nokia 9802.
When learning remote to remote the mx-500 says ok but the satdekoder don't respond.
When i try to learn the 8811 with the sat remote it works.

How am i going to get the mx-500 to work against the nokia 9802 ?

Protocol=Nokia
Device=14
Sub-Device=0
OBC=80
Hex Cmd=50
EFC=144

Frequency=35874

Sent Repeatedly while key i being held:
+416 -278 +166 -274 +166 -274 +166 -778 +166 -610 +166 -274 +166 -274 +166 -274 +166 -274 +166 -448 +166 -448 +166 -274 +166 -274 +166 -92248

Is the info i get with jp1 of the 8811.

Please advice ?

Yours
MusenKba

[The Robman]

In this case, the JP1 remote has done it's job properly, so there's not much for the JP1 experts to look at. Your best bet would be to take this question to the HTM forum at Remote Central and see if other MX500 owners have had problems with the Nokia.

http://www.remotecentral.com/cgi-bin/mb ... r/list.cgi

[MusenKba]

thanks

i'll rewert to remotecentral

mus