|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
joegovernale
Joined: 26 Jun 2005 Posts: 17
|
Posted: Wed Aug 17, 2005 5:37 am Post subject: 9910 macros confusion/timing(?) issue using RF |
|
|
Some macros on my 9910 remote are apparently confusing my Scientific Atlanta Eplorer 8300HD cable DVR. The macros work as expected with the RF repeater unplugged and with an 8910 (non-RF) remote. My current fix is to cover the 9910 remote's LED. Has anyone had any similar experiences? BTW, I have 6 9910s and 4 8910s (Long story!) and the problem is the same regardless of the remote and RF box. I haven't noticed any similar problems with macros for other devices. |
|
Back to top |
|
|
Bebert2
Joined: 06 Apr 2005 Posts: 21
|
Posted: Mon Aug 29, 2005 4:36 pm Post subject: |
|
|
I have some similar issues with my URC-9911(9910). I don't know if the problems are caused by the RF base vs. infrared, or the extender 1, or some hardware, device-related issues.
I think it might be something with the Scientific Atlanta 2200 cable box. When entering channel numbers directly, I sometimes need to push buttons more than once. Usually, when pressing the button again (on the One-for-all), I wiggle the remote in a different angle (in the air) and it works. Might require a few extra presses but in the end, it works. Same thing with the volume on my Yamaha amp. If I hold the volume down button, sometimes it will go all the way down. Sometimes, it will go down a little (for example, from -20 db to -24 db) then it stops. I change the angle on the remote and press the button again...
Minor hassles if you consider all the benefits offered by JP1 and more specifically, the extender 1 for the URC-9910/8910.
Bebert _________________ URC-9910 (prior use : RCU810)
Yamaha HTR-5760S A/V receiver
Pioneer DV-578-A DVD player
Scientific Atlanta Explorer 2200 cable box
Hitachi Ultravision 42v515 LCD projection HDTV
Polk Audio R15 bookshelf speakers |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Tue Aug 30, 2005 2:21 am Post subject: |
|
|
Possible cause number 1: Weak batteries. My SA satellite box is the first component to go flaky as the remote batteries start to weaken (I'm also using an IR/RF "Command Centre")
Possible cause number 2: Interference from adjacent components. My SA box ALSO responded only intermittently regardless of angles, batteries, waving about, etc. until I re-ordered the components in my A-V cabinet. The SA box remained in the same place, but I relocated a combo DVD-VCR as far away as I could, and suddenly the SA box sensitivity skyrocketed. Apparently the combo unit is not well shielded, and along with the SA box's already identified sensitivity, there was enough interference to wreak havoc with my IR signals. Interestingly, proximity of the DVD-VCR to OTHER components seems to not affect them - from which I infer that my other components are of somewhat "higher"quality. (I would not expect any of your compnents to be causing this kind of problem, however 8) ) _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21211 Location: Chicago, IL |
Posted: Tue Aug 30, 2005 7:23 am Post subject: Re: 9910 macros confusion/timing(?) issue using RF |
|
|
joegovernale wrote: | Some macros on my 9910 remote are apparently confusing my Scientific Atlanta Eplorer 8300HD cable DVR. The macros work as expected with the RF repeater unplugged and with an 8910 (non-RF) remote. My current fix is to cover the 9910 remote's LED. |
When you use the URC-9910 in the same room as where you hve the base unit located, you have two sources of IR firing away at your equipment (ie, the IR-LED in the remote and the ones in the base unit). Typically, the equipment isn't so sensitive that this is a problem, but it appears that this isn't the case with your S/A box.
Maybe you should leave a URC-8910 in the main room and just use the URC-9910 from all the other locations. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
joegovernale
Joined: 26 Jun 2005 Posts: 17
|
Posted: Thu Sep 01, 2005 5:20 am Post subject: |
|
|
I got some more time to experiment with this last night and found that the problem seems to be RF interference, not IR. I unplugged the base RF/IR repeater and found that the problem gets worse when I have the 9910 remote closer to the SA cable box. The 8910 does not have the problem so it appears to be RF pickup by the cable box from the 9910. If I get ambitous, I may try opening the 9910 and disabling the RF board to see if this is eliminates the problem.
This also seems to fit in with comments in other posts about RF interference and "bad neighbors". BTW, the cable box is fairly far removed from all of my other equipment.
Capn, thanks for the battery suggestion. The problem is worse with rechargeable batteries than with alkalines (4.8V vs 6V).
I forgot to mention in my original post that I am using both the 9910 and 8910 with extenders and the same commands downloaded to them. The only issues are with Scientific Atlanta transport commands used in a macro. The problem is also there on smaller macros involving transport functions on the 9910 without using the extender. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21211 Location: Chicago, IL |
Posted: Thu Sep 01, 2005 7:19 am Post subject: |
|
|
The "bad neighbor" stuff is where there is extra RF in the air that causes the base unit to send more IR signals than it's supposed to, which doesn't seem to be what's happening in your case. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|