View previous topic :: View next topic |
Author |
Message |
jskinner
Joined: 02 Oct 2003 Posts: 7
|
Posted: Tue Nov 18, 2003 8:29 am Post subject: Apex DVD question |
|
|
Hello all. Just got my JP1 interface built over the weekend and uploaded the Apex 1100w code set and it works great (and no shift key). Thanks all for your efforts.
I could not see a Previous Chapter or Next Chapter buton configured. So I used the learning feature and them mapped them to the r-rew and f-fwd buttons. I am wondering how I can directly assign the r-rew and f-fwd to execute these desired functions.
Thanks for all of you help.
Jeff |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Tue Nov 18, 2003 10:28 am Post subject: |
|
|
Did you check the CH+/- buttons to see if that's what they do?
In order to add these two functions to the upgrade, take a look at the learned signals in IR.exe, it should show the NEC1 protocol with a device code of 5. It should also show an OBC and EFC value. The file that you used has OBC selected, so make a note of the OBC values and then add new entries for Next Chap and Prev Chap in the Functions list. Then finally, go to the Buttons list and assign these two new functions to actual buttons. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
jskinner
Joined: 02 Oct 2003 Posts: 7
|
Posted: Tue Nov 18, 2003 10:59 am Post subject: |
|
|
I did not check the CH+/- until this morning and that moved the chapters. Thanks Rob!
I will look more closely the next time!
Jeff |
|
Back to top |
|
|
|