View previous topic :: View next topic |
Author |
Message |
geraud
Joined: 21 Sep 2003 Posts: 2
|
Posted: Sun Sep 21, 2003 3:30 am Post subject: JP1 connector on URC6800 VCR Pro 8 |
|
|
Hi
I would like to know how to make a JP1 cable with my URC6800, because my JP1 connector inside the remote has only 3 holes (number 1 on the left).
Thanks for your help.
(excuse me for my english language )) )
Nico _________________ french user and beginner... |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Sep 21, 2003 1:00 pm Post subject: |
|
|
Hi Nico,
Does your remote look like this...
If so, this remote was created before UEI started using EEPROMs, so there's not much chance that you can use JP1 with it.
But hey, your remote could be different, so you could try opening it up and seeing if there's an EEPROM chip on the circuit board somewhere.
Rob
http://www.hifi-remote.com |
|
Back to top |
|
|
geraud
Joined: 21 Sep 2003 Posts: 2
|
Posted: Mon Sep 22, 2003 2:01 pm Post subject: Re old 6800 |
|
|
Hi
My one is this :
But I'll try to open it and look to see if there's an eeprom inside...
Thanks
Nico _________________ french user and beginner... |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Sep 22, 2003 6:23 pm Post subject: |
|
|
In that case, I imagine you can update it with JP1. Does it have a 6-pin connector in the battery compartment. This remote looks almost identical to the Maestro II which does have a 6-pin connector and does have JP1 support.
|
|
Back to top |
|
|
|