View previous topic :: View next topic |
Author |
Message |
ryckebusch
Joined: 21 May 2005 Posts: 2
|
Posted: Sat May 21, 2005 5:36 pm Post subject: WinXP 64 and the parallel port.... |
|
|
I have used IR.exe in the past and am now setting up a new home theatre and of course I just had to build a new PC and run XP64. I am getting the strangest error.
Unable to initialize drivers for any JP1 device.
Parallel/Serial error
Problem with NT prot driver
Starttdriver: Unable to start service
THis driver has been blocked form loading. Please make sure you have Admin rights
I am logged on as the administrator. I might have to resurect my win98 machine to get my HT pro going.
Any thoughts anyone?
Thanks Jules |
|
Back to top |
|
|
ryckebusch
Joined: 21 May 2005 Posts: 2
|
Posted: Sat May 21, 2005 5:47 pm Post subject: changed decodeIR.dll |
|
|
Well I have the latest Decode IR.dll and now I get an error "Privileged instruction"
Jules |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Sat May 21, 2005 7:29 pm Post subject: Re: changed decodeIR.dll |
|
|
ryckebusch wrote: | Well I have the latest Decode IR.dll and now I get an error "Privileged instruction" |
You make it sound like you think updating DecodeIr has something to do with the "Privileged instruction". Maybe it does, but nothing you said makes that seem likely. I think it's still just IR.EXE
To be certain whether DecodeIr.dll is a factor, you can remove it entirely. IR.EXE can run just fine without it and just won't decode learned signals correctly.
I assume IR.EXE will still fail. I don't know anything one way or the other about IR.EXE compatibility with XP64, but it sounds like the driver used to remove printer port protection isn't working. |
|
Back to top |
|
|
vdubuclet
Joined: 09 Jan 2006 Posts: 22
|
Posted: Thu Mar 27, 2008 11:48 pm Post subject: Solution to Privileged instruction??? |
|
|
Was there a solution to this? I am having the identical problem. Running Win Vista Ultimate 64 bit version. Using IR version 7.11. When I try to set the parallel port HEX address to 3BC (device manager says LPT3) I get the privileged instruction error. When I tried to download from the remote or check interface I get the same error. I am trying to use a simple interface parallel cable. I purchased a parallel card to add to my new PC as it did not come with one on board.
I am logged on as an administrator and I have tried right clicking on ir.exe and selecting run as administrator with no luck.
Thanks for the help. |
|
Back to top |
|
|
vdubuclet
Joined: 09 Jan 2006 Posts: 22
|
Posted: Mon Mar 31, 2008 9:47 pm Post subject: Anybody? |
|
|
? |
|
Back to top |
|
|
|