JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Discrete audio input Code for Pioneer vsx-1015

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
kreed



Joined: 16 Apr 2005
Posts: 2

                    
PostPosted: Sat Apr 16, 2005 2:41 pm    Post subject: Discrete audio input Code for Pioneer vsx-1015 Reply with quote

This is a new receiver out from pioneer that is very similar to the 1014. I have searched and checked all the pioneer files at the yahoo group but cannot find this. what I need are discrete codes to select the analog and digital inputs of the receiver. info follows

1. Device: Pioneer vsx-1015
2. Type of device: audio/video receiver
3. JP1 Remote model: 15-2116
4. JP1 user? No but one is on the way
5. Still have original remote? yes
6. Checked the file section? yes
7. Checked the Pronto file section? yes
8. Partially working setup code? AMP/118
9. Learning remote question? The original Pioneer remote does not offer this function.

on the pioneer remote there is a button called "signal select" that cycles thru auto-analog-digital. however none of the "signal select" codes that I've found in the pioneer files including the pioneer master file work.

Thanks for any help.
Back to top
View user's profile Send private message
kreed



Joined: 16 Apr 2005
Posts: 2

                    
PostPosted: Sat Apr 16, 2005 4:05 pm    Post subject: Reply with quote

I should add that AMP/0013 doesn't control the receiver at all but that setup code will accept the 118 EFC and it works. 118 is discrete VIDEO1 input by the way.

RCVR 1023 does work with this receiver.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Sat Apr 16, 2005 5:13 pm    Post subject: Reply with quote

Check the upgrade files for the other models of Pioneer receivers to see if they have discrete input codes included, then when your cable arrives, give them a try.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control