|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
szfsoft
Joined: 01 Apr 2005 Posts: 1
|
Posted: Fri Apr 01, 2005 6:55 pm Post subject: Interface Trouble : One remote works, Another DOES NOT |
|
|
Hi -
I have been using my JP1 cable (Simple interface) on my URC-8881 remote, and have been able to use it to successfully upload and download configurations with that remote.
Now, having gotten two Atlas 5-device PVR remotes from the cable company, I tried programming both of them with this cable to no avail. I tried turning the cable around, taking the batteries out and restarting the program and computer. I can still successfully program the URC- 8881. However, these remotes don't work.
I notice the remote says "JP1.2" next to the interface. Is this the standard JP1 interface? Do I need to build a new cable to work with these remotes?
Please let me know if you have any advice regarding this problem. |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Fri Apr 01, 2005 7:17 pm Post subject: Re: Interface Trouble : One remote works, Another DOES NOT |
|
|
szfsoft wrote: | I notice the remote says "JP1.2" next to the interface. Is this the standard JP1 interface? | That indicates that one of the new flash-memory chips is being used in the remote. As of now, these are not compatible with the current JP1 tools. _________________ Mark |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|