trouble getting the SP tab in IR 6.0

greenough1 · Post by **greenough1** » Fri Feb 11, 2005 12:20 am

I can't figure out why I don't have a SP tab in IR6.0.
I've got an 8811 running extender 3.

I addes the [Special Protocols] section to my rdf (6_80_2x3 (URC-881x_801x_601x x3 2K).rdf):
[Special Protocols]
LDKP=01F9

I manually added the protocl 01f9 and device tv/1106 as per the 6012 extender v1.1 doc.

I uploaded to the remote and downloaded. Still no SP tab.

Help,
jeff

Nils_Ekberg · Post by **Nils_Ekberg** » Fri Feb 11, 2005 7:15 am

Try downloading the latest RDF's which has all the SP stuff in it. If that does not cure the problem upload your IR file and place a link to it here so we can take a look at it.

greenough1 · Post by **greenough1** » Fri Feb 11, 2005 9:02 am

Can you tell me which are the latest rdf's and provide a link?
Thanks. If that doesn't fix it, I'll post my ir file.

Best,
jeff

Nils_Ekberg · Post by **Nils_Ekberg** » Fri Feb 11, 2005 9:08 am

Go to the Software section of this forum. There are stickies there for all the jp1 related stuff.

Or just go to the new file section above and pick tools.

e34m5 · Post by **e34m5** » Fri Feb 11, 2005 10:25 am

Remove the space betwee Special and Protocols...that one also bit me...

greenough1 · Post by **greenough1** » Fri Feb 11, 2005 10:45 am

Thanks guys. I did have the space error in [SpecialProtocols].

With the 1.17 rdf's, I then did get the SP functions tab, but no default definitions on that page.

I updated to 1.18b rdf's and it all magically works.

Thanks,
jeff

Nils_Ekberg · Post by **Nils_Ekberg** » Fri Feb 11, 2005 11:16 am

1.18 is where I added it all. None of the SP stuff was in 1.17 since IR 6.00 was not available then.

Glad you have it worked out

greenough1 · Post by **greenough1** » Fri Feb 11, 2005 11:42 am

Thanks again Nils. Now I have to figure out how to setup the LKP's

.

jeff