JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Help with Sat receiver Pioneer Goldbox

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Code Search (Closed)
View previous topic :: View next topic  
Author Message
valery



Joined: 31 May 2004
Posts: 8

                    
PostPosted: Wed Jan 12, 2005 2:09 am    Post subject: Help with Sat receiver Pioneer Goldbox Reply with quote

1. Device: Pioneer Goldbox 1520
2. Type of device: Sat receiver
3. JP1 Remote model: 8810
4. JP1 user? Yes
5. Still have original remote? Yes
6. Checked Yahoo file section? Yes
7. Checked Pronto file section (at R/C)? Yes

My problem: The learned command works right, but when I use the data of decoded IR for protocol and EFC / OBC for build an upgrade with KM, I obtain only the buttons 0 - 9 and power to work, all the others don't.
I have decoded a CCF and have gained the same results of decodeIR that I have inserted in KM. Posted in the diagnosys area, link:
http://groups.yahoo.com/group/jp1/files/Diagnosis%20Area/pioneer%20goldbox.txt
Thanks for your help,
Valery
Back to top
View user's profile Send private message
uwereinert
Advanced Member


Joined: 27 Aug 2003
Posts: 153
Location: Chemnitz

                    
PostPosted: Wed Jan 12, 2005 2:42 am    Post subject: Reply with quote

In KM, select:

button code = OBC
protocol name = RC5
device 1 = 10
device 2 = 110
device 3 doesn't matter

In functions, enter the OBC values and if a OBC value > 63, then enter 1 in the byte 2 column. This should do the trick.

Uwe
Back to top
View user's profile Send private message
valery



Joined: 31 May 2004
Posts: 8

                    
PostPosted: Wed Jan 12, 2005 3:47 am    Post subject: Reply with quote

Hurrah! It works Very Happy ... now can you learn me what I have done?
Thank You very much
Back to top
View user's profile Send private message
uwereinert
Advanced Member


Joined: 27 Aug 2003
Posts: 153
Location: Chemnitz

                    
PostPosted: Wed Jan 12, 2005 6:04 am    Post subject: Reply with quote

After selecting protocol name = RC5, you should read the protocol help of KM. After this, you should know, what you have done Surprised

Uwe
Back to top
View user's profile Send private message
valery



Joined: 31 May 2004
Posts: 8

                    
PostPosted: Wed Jan 12, 2005 6:17 am    Post subject: Reply with quote

OK, I am beginning to understand something...
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Code Search (Closed) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control