View previous topic :: View next topic |
Author |
Message |
leesweet
Joined: 20 Sep 2003 Posts: 57 Location: Northern Virginia, USA |
Posted: Sun Nov 02, 2003 10:17 am Post subject: multiple ReplayTV function problems |
|
|
I've run into some strange issues programming multiple Replay 50xxs into an 8910. Using keymapmaster and the replay file from Yahoo, most things work fine. (I've changed the unit number in the spreadsheet, in the Replays, picked the right devices on the device buttons, etc.)
For example, Replay Zones (on PIP, by default from the file) and Replay Guide (on info), are not unique/unit based commands.
Concrete example: With the 'other replay' chosen, Info pops up the RG on the 'correct' Replay. However, Exit *is* unique. To use that to exit the RG, I *do* have to select the 'correct' device button.
What could make some functiions 'unit dependent' and others not?! _________________ -Lee |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Nov 02, 2003 11:40 am Post subject: |
|
|
Very strange. The answer is almost certainly going to be "user error", so I would suggest that you put your IR file and BOTH KM files into a zip and load it up into the Diagnosis Area. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
leesweet
Joined: 20 Sep 2003 Posts: 57 Location: Northern Virginia, USA |
Posted: Sun Nov 02, 2003 11:46 am Post subject: |
|
|
I've noticed something that's even stranger.... those two commands for Replay1 work on R2, as I described. Howver, the same ones for R2 don't work on R1. So, it appears to only be the R1 commands that are 'bad' but they are from the same device file (with the unit code changed, of course...)
I don't see how, but could this be linked to the fact that I only have one protocol added to IR: the 0145 for the Advanced Replay one. _________________ -Lee |
|
Back to top |
|
|
leesweet
Joined: 20 Sep 2003 Posts: 57 Location: Northern Virginia, USA |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Nov 02, 2003 12:33 pm Post subject: |
|
|
Lee, take a look at the "Learned Signals" tab in IR.exe _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
leesweet
Joined: 20 Sep 2003 Posts: 57 Location: Northern Virginia, USA |
Posted: Sun Nov 02, 2003 12:53 pm Post subject: |
|
|
Oops... Guess learned overrides others, then, hm? My bad... okay, next time check *every* tab before posting!
Thanks much for the quick answer! _________________ -Lee |
|
Back to top |
|
|
|