JP1 Remotes

[StevenPritchett]

Hey everyone. I was just wondering if anyone would be able to tell me how to setup my remote. I hold setup until the light stays on, then i press TV, setup again, and then the only numbers I can press are 039, which is the code for my Sharp TV. I don't know if this is what I need to do or not, but if it is then it's not working. My friends in my residence and I would be very thankful if someone could help us with this because we haven't had TV in around a week. Thanks

[MaskedMan]

1. press TV and release
2. press and hold SETUP for two blinks
3. enter 0-0-3-9
_________________
Edmund

[The Robman]

Steve, does your remote have a model number (ie, something like 15-19?? or 15-21??), if so, what is it.

Not all Radio Shack remotes are made by UEI, so they don't all use the same setup procedure.

Plus, you can download a new manual from here:
http://www.hifi-remote.com/files/manuals/
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

[StevenPritchett]

ok, here's what happens....

1. press TV
2. press and hold setup, light blinks once, comes on again and remains on
3. press 0-0-3 light goes off
OR
3. press 0-3-9 light goes off

either way nothing happens. And we don't have a model number, all manuals and boxes were thrown out, unless it's written on the remote itself.

[The Robman]

The only 3 device that I can find on the current RS web site is the one pictured below, is this what you have? If so, it's a 15-2143, but it's really just a re-badged "philips Magnavox" remote. Click on the pic for the user manual.



Here's a picture of the Philips Magnavox PM-DVD6 for comparison purposes:


_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!