View previous topic :: View next topic |
Author |
Message |
jev3gs
Joined: 25 Sep 2004 Posts: 3
|
Posted: Sat Sep 25, 2004 5:45 pm Post subject: Discrete for Toshiba 30HF84 TV |
|
|
Anyone know if the Toshiba 30HF84 has a discrete on and off. If not anyone know if any 30" HD Tube have a discrete on and off? |
|
Back to top |
|
|
jev3gs
Joined: 25 Sep 2004 Posts: 3
|
Posted: Tue Sep 28, 2004 1:28 pm Post subject: |
|
|
So far I have no luck. I have tried EFC 006 and 010, which supposedly
work for the 30HF83, but apparently it doesn't work with the 30HF84. I can't believe Toshiba would make a change like that. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21244 Location: Chicago, IL |
Posted: Tue Sep 28, 2004 3:16 pm Post subject: |
|
|
What setup code where you using when you tested those EFCs? I'm hoping that it was TV/0156. How did you test them? Are you pretty confident that you followed the procedure correctly? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
jev3gs
Joined: 25 Sep 2004 Posts: 3
|
Posted: Tue Sep 28, 2004 9:49 pm Post subject: |
|
|
Actually I used setup 1156 so it wouldn't over write the default code in the controller for that TV. Protocol name: NEC1, which is the same as the 30HF83 before it. My remote is 15-2117. Has anyone got a discrete On/Off to work on 30HF84 yet? I can't believe Toshiba would have it in the 83, but pull it out of the 84.
I am pretty confident I did it correctly. This is the 4th device I have programed into my remote now. I could of made a mistake, but I have tried it numerous times. Oh man this is driving me crazy |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21244 Location: Chicago, IL |
Posted: Tue Sep 28, 2004 10:40 pm Post subject: |
|
|
Well, by using an upgrade that you created, you've introduced a few more variables into the equation. If you're primary goal was to verify whether those EFCs work or not, it would have been a much better idea to first test them by themselves using the built in TV/0156 code, using either the SETUP+nnn method or keymoves.
However, if your upgrade works for all the other TV functions then I'm guessing you did it correctly and maybe your set doesn't support the discretes. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|