| View previous topic :: View next topic |
| Author |
Message |
afaa
Joined: 07 Jun 2004
Posts: 22
|
 Posted: Sat Aug 21, 2004 8:07 pm Post subject: 6131 and Dish PVR508, have press key twice |
 |
|
The Dish PVR508 has a double byte command. It appears the 6131 doesn't send both bytes at one key press. I have to press the key twice or press and hold a little in order for it to complete the command.
Any suggestions? |
|
| Back to top |
|
 |
afaa
Joined: 07 Jun 2004
Posts: 22
|
| Posted: Sat Aug 21, 2004 8:10 pm Post subject: |
|
|
| As a note, I don't have this problem with the RS 15-2104 |
|
| Back to top |
|
|
jetskier
Joined: 09 Dec 2003
Posts: 287
Location: Nevada
|
| Posted: Mon Aug 23, 2004 3:40 pm Post subject: |
|
|
If you are using an extender, it is actually not a two-byte protocol. It has to do with the duration of the signal. It seems to like a minimum of two bursts for one command. If you are using the Dish Network Combo as the upgrade, then you can change the duration. I experimented with it and $03 (3 bursts) seems to work, but anything great takes longer between presses which is not good for keying in numbers. THe duration is found here in red. THe default is 06, but I tried 02-10 and 03 worked the best to get it to respond and still allows for quick keying without waiting for the remote to finish sending the signal more than 3 times.
| Quote: | Upgrade protocol 0 = 01 e2 (S3C80) Dish Network Combo
2b 5c 51 8b 16 b6 59 05 03 00 c5 03 32 00 c5 05
73 0b f2 00 c5 0b f2 05 02 43 8c 18 08 56 c1 03
87 21 04 29 04 8d 01 46
End |
|
|
| Back to top |
|
|
afaa
Joined: 07 Jun 2004
Posts: 22
|
| Posted: Thu Aug 26, 2004 9:32 am Post subject: |
|
|
| Thanks, I'll try it tonight and let you know if it works. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
