MPSAN
Joined: 17 Oct 2003 Posts: 77 Location: Portland, OR |
Posted: Sun Aug 22, 2004 1:24 pm Post subject: |
|
|
I checked the diode at least twice...with 2 meters as well. This is dumb, but I checked driver and it said serial/parallel was OK and USb is not found, as expected.
I tried the interface test to get an exact failure message with my 15-1994 and it said OK!!!
I did a download and it, too was OK. I think I found the "will not work on Saturday" bug. I have not changed anything. Cable was OK since I built it. Will try 2117 next. I have now added rptv to the 15-1994 and discrete works!TIA
Dave.
Mark Pierson wrote: | MPSAN wrote: | Anyway, cable is OK as I tested pin-out from Parallel end to jp1 end and is OK. I used 1K resistors and built the simple interface cable myself. Parallel pin 3 to JP1 6 is 953 ohms. Same on pin 4 to jp1 pin 5. |
And obviously you verified the diode is oriented properly, correct? |
_________________ "It it ain't broke, fix it 'til it is" |
|