View previous topic :: View next topic |
Author |
Message |
cerulean
Joined: 22 Sep 2003 Posts: 21 Location: Shrewsbury, MA |
Posted: Tue Oct 21, 2003 6:09 am Post subject: 6131: TiVo Code Problems |
|
|
Hi,
I'm having problems with the Philips-TiVo.txt upgrade code. Most of the PVR buttons on my 6131 work, but several (thumbs up, thumbs down, replay and ->|) don't do anything. When I'm in PVR mode and press those buttons, the LED on the remote doesn't light. I learned the codes for those buttons to my 2104 and checked them against the Philips-TiVo.txt functions. The buttons are defined in Philips-TiVo.txt. Am I missing something on the setup of the remote? Or do I have to use Key Moves to set up those buttons for the 6131?
Thanks,
Bob |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Tue Oct 21, 2003 6:41 am Post subject: Re: 6131: TiVo Code Problems |
|
|
cerulean wrote: | The buttons are defined in Philips-TiVo.txt. |
Are they assigned to buttons which are part of the default key map? Or to buttons which need key moves? KM will NOT create key moves for the non-extended 6131 remote. _________________ Mark |
|
Back to top |
|
|
cerulean
Joined: 22 Sep 2003 Posts: 21 Location: Shrewsbury, MA |
Posted: Tue Oct 21, 2003 7:16 am Post subject: Not sure if buttons are part of default key map... |
|
|
Mark,
How can I tell if the button's are part of the default key map? I can see a key move section disappear from the upgrade code code section when I switch to the 6131 in KM, but the buttons still show up under the function tab in the KM spread sheet.
Thanks,
Bob |
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
|
Back to top |
|
|
uwereinert Advanced Member
Joined: 27 Aug 2003 Posts: 153 Location: Chemnitz |
Posted: Tue Oct 21, 2003 8:17 am Post subject: |
|
|
The Philips-TiVo.txt was created for a 15-1994. If you switch to the 6131, you have to reassign the buttons on the buttons sheet. IIRC, this is valid for the thumb up and down button and for the TiVo button.
Uwe |
|
Back to top |
|
|
cerulean
Joined: 22 Sep 2003 Posts: 21 Location: Shrewsbury, MA |
Posted: Tue Oct 21, 2003 9:00 am Post subject: |
|
|
Greg,
I'll check the Buttons sheet for @'s when I get home.
I have two TiVos. (That's what got me interested in JP1. I've been using 1 1994, 1 2104 and a pair of modded 1993's. I've also got a 1995 and a modded 2103 gathering dust.)
I had read that post, but it didn't answer why I could see the function in KM. Now I know to look for the @ on the Buttons Sheet.
Thank you,
Bob |
|
Back to top |
|
|
cerulean
Joined: 22 Sep 2003 Posts: 21 Location: Shrewsbury, MA |
Posted: Tue Oct 21, 2003 9:03 am Post subject: |
|
|
uwereinert wrote: | The Philips-TiVo.txt was created for a 15-1994. If you switch to the 6131, you have to reassign the buttons on the buttons sheet. IIRC, this is valid for the thumb up and down button and for the TiVo button.
Uwe |
Uwe,
Thank you for the reply. I'll take a look at KM and the Buttons sheet to see if I can reassign the buttons. If not I'll probably manually do Key Moves.
Regards,
Bob |
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
|
Back to top |
|
|
uwereinert Advanced Member
Joined: 27 Aug 2003 Posts: 153 Location: Chemnitz |
Posted: Tue Oct 21, 2003 2:18 pm Post subject: |
|
|
Bob,
this is a file for loading into IR, not into KM!
Uwe |
|
Back to top |
|
|
cerulean
Joined: 22 Sep 2003 Posts: 21 Location: Shrewsbury, MA |
Posted: Tue Oct 21, 2003 6:44 pm Post subject: Button Sheet did the trick |
|
|
None of the keys had @'s. But the TiVo specific buttons weren't assigned any functions. The TiVo specific functions were assigned to other buttons (pip, enter, etc.). I cleared those buttons, reassigned the functions to the correct buttons and that did the trick.
Thanks,
Bob |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Tue Oct 21, 2003 6:57 pm Post subject: Re: Button Sheet did the trick |
|
|
cerulean wrote: | None of the keys had @'s. |
On the 6131, that's correct. KM doesn't create key moves for the un-extended 6131 because they use the "new" style.
Quote: | But the TiVo specific buttons weren't assigned any functions. The TiVo specific functions were assigned to other buttons (pip, enter, etc.). |
Correct again, as that file was created for a 1994 remote.
Whenever you use an existing upgrade file, you always need to make sure your model Remote is selected. Then, you should check the layout sheet to see which Device Mode yields the most buttons, and select that on the Setup sheet. Finally, you need to setup the button assignments to your liking on the Buttons sheet. _________________ Mark |
|
Back to top |
|
|
cerulean
Joined: 22 Sep 2003 Posts: 21 Location: Shrewsbury, MA |
Posted: Tue Oct 21, 2003 8:40 pm Post subject: Re: Button Sheet did the trick |
|
|
Mark Pierson wrote: | Whenever you use an existing upgrade file, you always need to make sure your model Remote is selected. Then, you should check the layout sheet to see which Device Mode yields the most buttons, and select that on the Setup sheet. Finally, you need to setup the button assignments to your liking on the Buttons sheet. |
I've always used Key Moves to patch any issues I had with the upgrade files. But the 6131 is forcing me to learn new things because I can't do Key Moves in IR. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Tue Oct 21, 2003 8:50 pm Post subject: |
|
|
It's forcing you into better habits, which is a good thing. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Wed Oct 22, 2003 12:07 pm Post subject: Re: Button Sheet did the trick |
|
|
cerulean wrote: | But the 6131 is forcing me to learn new things because I can't do Key Moves in IR. |
There's always the 6131 extender which gives you the capability to do traditional Key Moves. _________________ Mark
Last edited by Mark Pierson on Sat Nov 01, 2003 8:53 am; edited 1 time in total |
|
Back to top |
|
|
cerulean
Joined: 22 Sep 2003 Posts: 21 Location: Shrewsbury, MA |
Posted: Wed Oct 22, 2003 5:28 pm Post subject: Re: Button Sheet did the trick |
|
|
Mark Pierson wrote: | There's always the 6131 extender which gives you the capability to do traditional Key Moves. |
Mark,
I've yet to find a compelling reason to use the extenders. Until there's a feature that I can't handle with KM and key moves, I'll probably hold off on using the extenders.
/Bob |
|
Back to top |
|
|
|