View previous topic :: View next topic |
Author |
Message |
PAW
Joined: 07 Jul 2004 Posts: 3
|
Posted: Wed Jul 07, 2004 5:42 pm Post subject: Discrete on & off for Panasonic TV CT-32G22V |
|
|
Does any one have the discretes for on & off for a Panasonic CT-32G22V?
This uses TV_250. I've tried the advanced codes but no luck.
I've got a RS 15-2116 and a MX-500 |
|
Back to top |
|
|
PAW
Joined: 07 Jul 2004 Posts: 3
|
Posted: Thu Jul 15, 2004 11:59 am Post subject: |
|
|
Any one??
Any suggestions of where else to exlpore for these? I've searched here and remotecentral.
TIA |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Thu Jul 15, 2004 12:13 pm Post subject: |
|
|
If you've tried these codes...
534 Power On (works)
282 Power Off (un-reliable)
536 Power On/Off (toggle)
that you would have found here...
http://www.hifi-remote.com/cgi-bin2/ueic.cgi?TV_0250
and they don't work, I'm not sure there's much we can do. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
Posted: Thu Jul 15, 2004 1:05 pm Post subject: |
|
|
Paw,
I can't improve on the answer I gave you in the discrete forum at RC:
Panasonic is very consistent about what commands it uses for Power On, Off, and Video 1 through 4. Every display TV, RPTV, HDTV and Plasma that I have ever come across responds to those same commands, IF it has been programmed by Panasonic to recognize discrete commands. Panasonic is somewhat inconsistent about applying those discrete commands to the various models.
I know it seems like there should be another command out there but I have never seen one and there is a lot of confusion. For example there are only 256 EFC's, if you see an EFC>255 keep subtracting 256 until its <255. On is EFC 534-256=278 or 278-256=022 and Off is EFC 282-256=026. The remote will respond to any of them because it truncates the binary to the least significant 8-bits.
When I went back to find the link posted above, both power On and Off EFC's that you posted at Remote Central were incorrect (I hadn't noticed before) and I corrected them just now. So make sure you tried the right ones. _________________ -Jon |
|
Back to top |
|
|
PAW
Joined: 07 Jul 2004 Posts: 3
|
Posted: Thu Jul 15, 2004 6:02 pm Post subject: |
|
|
Thanks Rob and Jon
I was hopeing there was some magic or other forum that I had over looked. However, I'm sure now that my Panny TV doesn't support discrete on, discrete off. Darn!
I know now to check for at least discrete on and off when I buy compontents.
Jon: Yep! Just a typo in my remotecentral post. Thanks for the info on EFCs >256. That's the first I've seen that. I did retry all 3 permutations. For the ones that worked, all 3 worked.
I've solved my problem though. I upgraded my MX500 to an MX700. With the extra device pages (4 vs. 2) and the ability to have a macro on almost any button, I can program around my lack of discretes. I'll have a "switch to" page as the 1st page of every device. Using macros and being aware of what device I'm switching from and switching to, I should be able to make it work. This should make it more kid, wife and babysitter friendly. I should be thankful though. My wife and kids have learned to juggle 2 or 3 remotes without my constant assistance. I'll also have a power device on the main page to straighten out thinks when they get out of sync. Like when some luddite presses the on/off button actually on the TV it's self.
Thanks again guys! |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Fri Jul 16, 2004 8:47 am Post subject: |
|
|
Hey, if your MX-700 solution works, super!, but I don't see training MY wife to cycle through pages to deal with such a problem. If one button doesn't do it, then she's tuned out!
IMHO, the only solution is ToadTog! It works great, and particularly with the 2116, I can't imagine you needing EITHER the MX-500 or -700. I'm not sure whether you need to use the extender to install and use the ToadTog protocol, but you should look into it (and get your money back for the MX-700). |
|
Back to top |
|
|
|