View previous topic :: View next topic |
Author |
Message |
greg882
Joined: 14 Oct 2003 Posts: 7 Location: Corona, CA |
Posted: Thu Oct 16, 2003 12:56 pm Post subject: EEPROM for 6131 |
|
|
Yesterday, while ordering some parts to make a JP1 cable from mouser I noticed that they had EEPROMS. I am upgrading a 6131 and I ordered a Catalyst part - CAT24WC02J-1.8. This is a 2kB (256x8) serial SOIC EEProm. Did I order the correct part?
Also,
Getting the 6131 open was kind of a bear and in the process I broke a couple of the little plastic lips on the bottom half of the remote. These are the lips that the hooks from the top half engage. It seems like the remote should still be plenty strong when I reassemble it. What has been your experience? Should I apply a little glue to the hooks to assure that the remote is solid?
Thanks for your assistance
Greg
Note for the Robman - Thanks for the reply to my PM. I had placed my mouser order prior to seeing your response. |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Thu Oct 16, 2003 1:23 pm Post subject: |
|
|
That's the wrong part for most UEI remotes. I'm fairly sure it's wrong for the 6131.
When we say "2K" we mean 2K BYTES. When you buy a 2K, it's normally 2K bits. You need 16K bits for 2K BYTES. |
|
Back to top |
|
|
greg882
Joined: 14 Oct 2003 Posts: 7 Location: Corona, CA |
Posted: Thu Oct 16, 2003 1:28 pm Post subject: |
|
|
You are right - I did order the wrong part. I was even aware of the bits vs Bytes - I just placed the order too late at night.
Thanks
Greg |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Thu Oct 16, 2003 1:50 pm Post subject: |
|
|
Here's a guide to opening the remote without killing it:
http://www.hifi-remote.com/jp1/disassemble
Personally, I just slide a credit card in around the edge to pop them open. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
hhyatt
Joined: 24 Sep 2003 Posts: 19 Location: Kingsport, TN |
Posted: Mon Oct 20, 2003 8:56 pm Post subject: |
|
|
If you still have all the pieces you can probably do an acceptable job using "superglue". Model or Hobby shops have it and also sell an accelerator to speed up curing. You can also get it from Home Depot with Loctite brand. HD doesn't sell accelerator for it. I have used the thick "filling" formula that Loctite sells in a little plastic bottle that looks like fingernail polish bottle. I use a hair dryer to speed curing of this.
Watch out and don't get the glue on your hands or eyes. It will glue skin.
You can probably get by without doing any of this, but consider this if you think repair is necessary. _________________ HGH |
|
Back to top |
|
|
|