What Kind of Cable to Buy and Where to Buy It.

[pH7_jp1]

The WaveShare bare PCB option that you showed had a jumper that you could select 3.3V on the outputs. That seems like the safer option to me.

[JackFrost]

I can confirm that Waveshare board works. I can download info from remote in RMIR.

On Win10, just installed the latest drivers from FTDI, latest Java Runtime and the latest stable RemoteMaster bundle and it just works.

[Tanzbaerli]

For Europeans:

I bought this cable and can confirm that it works without any problems under Windows 11.
https://www.amazon.de/dp/B08JLRP6YV

Its just necessary to install the driver from
https://www.deshide.com/

[jacobacci]

Noob to all things JP1 here. I am located in Europe / Switzerland and I am looking to program All for One Contour IR remotes using a Windows 11 PC. I am wondering what would currently be the best cable to buy?

[The Robman]

Basically, you need an FTDI cable (or a Prolific cable), then you just need to modify the connector. More info here:

https://www.hifi-remote.com/forums/viewtopic.php?t=16360

[urc6131]

Folks, would one of these work as a JP 1.3 cable?

https://www.amazon.com/AITRIP-Converter ... B0DXT54KHT
https://www.amazon.com/gp/product/B08PK5723H
https://www.amazon.com/DSD-TECH-SH-U09G ... B083HVM7VZ

I am leaning toward first one as it is cheaper and I can reuse the jumper cables.

I have a confusion about this page: https://hifi-remote.com/wiki/index.php/JP1_Cables

One image ("PinOut JP1.x") showing the 2x3 socket with a label of RST. It is actually RTS, right?

[The Robman]

I would guess that all of the Amazon items you listed would work for JP1.

Yes, you spotted a typo.

[jgfarrell]

Another Amazon option for you:
https://www.amazon.ca/dp/B0CX8VYF8P (Amazon Canada)

I purchased this one a couple of months ago for an unrelated project because I didn't want to cut up my nicely shrink-wrapped JP1 cable.
I just tested it now on one of my remotes and can confirm that it works fine.

The Amazon.com link is insanely long, so just search for "Waveshare USB to TTL (C)" on amazon.com if you are in the USA.

[urc6131]

Would CH340 based serial work too? https://www.amazon.com/DSD-TECH-SH-U07B ... B09CK79B4C

I am reading about FTDI and I don't agree with their measure of sabotaging counterfeit equipment and punishing their customers who may not know they are using fake chip.

[The Robman]

I have no idea, but at $8.99 it won't cost you much to find out.

[mdavej]

Terrible option IMO since the all the needed pins are on completely different headers. Plus FTDI isn't the one sabotaging fakes. It's Prolific who does that.

We've posted many known good adapters already.

[urc6131]

Why? It comes with individual DuPont cables. The only pin not together is RTS which is just on a different header. No soldering required.

The sabotaging is widely reported as FTDIgate. https://hackaday.com/2014/10/22/watch-t ... ake-chips/ and they did it again, https://hackaday.com/2016/02/01/ftdi-dr ... ips-again/. It got so out of hand that Microsoft removed the driver from its windows update.