Can someone please make RDF for this new remote, file is
uploaded here.
http://www.hifi-remote.com/forums/dload ... e_id=26849
32413241 URC-179200-04R00 Need RDF For this New Remote.
-
The Robman
- Site Owner
- Posts: 21884
- Joined: Fri Aug 01, 2003 9:37 am
- Location: Chicago, IL
- Contact:
I'm ready to work on this one Tiku, whenever you are ready.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
-
The Robman
- Site Owner
- Posts: 21884
- Joined: Fri Aug 01, 2003 9:37 am
- Location: Chicago, IL
- Contact:
I had to do some Googling on this, but it appears this remote came from an M7 SAT801 Digital satellite hd-receiver, I found the user manual (in Dutch) here and from there I downloaded the remote manual and translated it to English here.
This remote appears to be a dedicated Satellite STB remote, with a few additional TV buttons. The user manual describes how to add a TV device to the remote. The remote doesn't have a dedicated SETUP button, like found on universal remotes, instead they ask you to hold the TV_Power and OK buttons simultaneously, then you can enter a TV code, or enter a 9xx command like the 991 described in the manual. I have no idea if this remote supports any other 9xx commands, so you'll have to experiment with those.
If it supports 994, I'd like you to program some keymoves.
If it supports 995, I'd like you to program some macros.
If it supports 980 or 981, I'd like you to do a reset, but be aware this will wipe out any existing programming, so it might not work your STB anymore, if indeed you have the M7 SAT801 unit that this came with.
This remote appears to be a dedicated Satellite STB remote, with a few additional TV buttons. The user manual describes how to add a TV device to the remote. The remote doesn't have a dedicated SETUP button, like found on universal remotes, instead they ask you to hold the TV_Power and OK buttons simultaneously, then you can enter a TV code, or enter a 9xx command like the 991 described in the manual. I have no idea if this remote supports any other 9xx commands, so you'll have to experiment with those.
If it supports 994, I'd like you to program some keymoves.
If it supports 995, I'd like you to program some macros.
If it supports 980 or 981, I'd like you to do a reset, but be aware this will wipe out any existing programming, so it might not work your STB anymore, if indeed you have the M7 SAT801 unit that this came with.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
994-not working only one blink @TV OR STBIf it supports 994, I'd like you to program some keymoves.
If it supports 995, I'd like you to program some macros.
If it supports 980 or 981, I'd like you to do a reset.
995-also not working same as above
980-working getting four blinks
981-working getting four blinks.
994 key mover i Did this
PRESS and HOLD OK+TV Untill LED flashes twice, then RELEASE.
1.TAP 9 - 9 - 4.
2.TAP the (TV)
3.TAP the ( VOL+)
4.TAP the (TV)
5.TAP the (VOL+) result one blink @TV
Since i have only three Device button option so i tried the the 2. with Mute & STB also, but the result was One Blink Only.