XSight Touch odd behavior

Since EZ-RC has closed down, JP1 is your only option to get these remotes upgrades. We will (eventually) support all remotes formerly supported by EZ-RC, including the Moster Revolution 200.

Moderator: Moderators

Post Reply
mdavej
Expert
Posts: 4631
Joined: Wed Oct 08, 2003 7:08 am

Post by mdavej »

Give these two a try if possible:

- Home, Settings, Reset, enter 981, Factory Reset

- If the remote is still unresponsive, it may be stuck in firmware upgrade mode. To recover from that on the Xsight Color, press the Power, 1 and 3 buttons while putting the battery back in. On the Xsight Touch, press Power and OK while putting the battery back in. Then re-connected to PC and continue with the firmware upgrade
Top
heavyharmonies
Posts: 7
Joined: Wed May 29, 2024 3:09 pm
Location: Central IL

Post by heavyharmonies »

Thanks for the reply. I left it in its cradle overnight and it appears to have recovered. Weird... these things are a wee bit wonky.
Top
Post Reply

Return to “Nevo and Xsight Remotes”