|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
davecs
Joined: 28 Mar 2005 Posts: 328 Location: UK |
Posted: Tue Apr 04, 2023 7:40 am Post subject: |
|
|
Thanks, Rob. It's Panasonic Combo, Main Device 176, OEM Dev1 2, OEM Dev2 32. PLAY is Subdevice 0, OBC 10. I checked the spreadsheet, and all transport controls had the same number there as in my rmdu. Does 160 sub 10 send a different signal to 176 sub 0?
I think the bigger issue is that work still needs to be done on the RDF (as supplied with RMIR 2.14.18). The fact that the Timed Macro as recorded on the remote itself, doesn't appear in RMIR when downloaded, although you get an extra segment right at the end, and one built in RMIR is ignored by the remote. _________________ URC7560/URC7562, URC8910, URC7980, URC6440/OARUSB04G and URC3661 |
|
Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014 Posts: 580
|
Posted: Tue Apr 04, 2023 8:09 am Post subject: New Remote URC-3660 |
|
|
I just made a timed macro on app1 of my remote and when downloaded it appears under the macros tab as a Real Time Macro.
I am not sure why it is not showing up for you |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Tue Apr 04, 2023 8:11 am Post subject: |
|
|
davecs wrote: | Does 160 sub 10 send a different signal to 176 sub 0? | That's asking, is 176.0 a different number to 160.10. Yes, different signals.
davecs wrote: | I think the bigger issue is that work still needs to be done on the RDF (as supplied with RMIR 2.14.18). The fact that the Timed Macro as recorded on the remote itself, doesn't appear in RMIR when downloaded, although you get an extra segment right at the end, and one built in RMIR is ignored by the remote. |
Sure, but there are other folks looking into the RDF questions. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
davecs
Joined: 28 Mar 2005 Posts: 328 Location: UK |
Posted: Tue Apr 04, 2023 8:55 am Post subject: |
|
|
The Robman wrote: |
That's asking, is 176.0 a different number to 160.10. Yes, different signals. |
OK. It was noticeable that the OBC's were the same across the board though. I guess they'd have to be different, otherwise it would be impossible to have a Panasonic CD and a Panasonic DVD/Bluray player at the same time.
The Robman wrote: |
Sure, but there are other folks looking into the RDF questions. |
Yes, and I've been trying to make sense of some of the stuff in this thread. Just trying to contribute whatever findings I get.
I do agree with Hamburger's proposal that there might have to be a "normal" RDF and a "hacked" RDF for this. Being able to use the "Activity" buttons as glorified "Power On" switches via a macro is what makes this remote worthwhile. It's almost as powerful as an extender. _________________ URC7560/URC7562, URC8910, URC7980, URC6440/OARUSB04G and URC3661
Last edited by davecs on Tue Apr 04, 2023 11:09 am; edited 1 time in total |
|
Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014 Posts: 580
|
Posted: Tue Apr 04, 2023 9:05 am Post subject: New Remote URC-3660 |
|
|
It is best just to have just the one RDF |
|
Back to top |
|
|
davecs
Joined: 28 Mar 2005 Posts: 328 Location: UK |
Posted: Tue Apr 04, 2023 11:33 am Post subject: Re: New Remote URC-3660 |
|
|
HamburgerHelper1 wrote: | I just made a timed macro on app1 of my remote and when downloaded it appears under the macros tab as a Real Time Macro.
I am not sure why it is not showing up for you |
OK I can't use the TV at this precise moment, but I took the remote and programmed a timed macro into it anyway. It doesn't have to make sense. I downloaded it into the remote, and it still didn't show in the Macros tab. I decided to upload my original download (factory set) to the remote, and programmed in another timed macro on the remote keyboard. I downloaded that from the remote too, and it still didn't appear on the macro page, merely in the segments.
Perhaps there's another difference between the 3660 and 3661 other than a few key names and the built in devices/protocols. _________________ URC7560/URC7562, URC8910, URC7980, URC6440/OARUSB04G and URC3661 |
|
Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014 Posts: 580
|
Posted: Tue Apr 04, 2023 12:10 pm Post subject: New Remote URC-3660 |
|
|
I see a difference in the RDF and since the remotes are the same
try adding $02 $03 to the segments type line so that it looks like this
SegmentTypes=$00 $01 $07 $08 $09 $10 $13 $1A $CD $CE $CF
This should solve the problem of Real Time Macro. not showing up |
|
Back to top |
|
|
davecs
Joined: 28 Mar 2005 Posts: 328 Location: UK |
Posted: Tue Apr 04, 2023 12:30 pm Post subject: Re: New Remote URC-3660 |
|
|
HamburgerHelper1 wrote: | I see a difference in the RDF and since the remotes are the same
try adding $02 $03 to the segments type line so that it looks like this
SegmentTypes=$00 $01 $07 $08 $09 $10 $13 $1A $CD $CE $CF
This should solve the problem of Real Time Macro. not showing up |
Thank you so much! That worked. What difference will $02 make? Would I be able to create a Real Time Macro on single device?
If I removed $CD $CE $CF would that mean that the Activity Keys would be able to run Macros by default? _________________ URC7560/URC7562, URC8910, URC7980, URC6440/OARUSB04G and URC3661 |
|
Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014 Posts: 580
|
Posted: Tue Apr 04, 2023 1:22 pm Post subject: New Remote URC-3660 |
|
|
$02 is the Multi-Macro segment
$03 is the timed macro
and no deleting $CD $CE $CF in the RDF will not make the activities buttons run Macros by default |
|
Back to top |
|
|
davecs
Joined: 28 Mar 2005 Posts: 328 Location: UK |
Posted: Tue Apr 04, 2023 2:28 pm Post subject: Re: New Remote URC-3660 |
|
|
HamburgerHelper1 wrote: | $02 is the Multi-Macro segment
$03 is the timed macro
and no deleting $CD $CE $CF in the RDF will not make the activities buttons run Macros by default |
OK, I made a timed macro in Special Functions under a device, and deleted the one on the Macros tab, and uploaded it. And it seems to work, judging by the flashing lights on the unit. I will get control of the TV soon and test it. Thanks for your help.
The previous absence of the $02 probably explains why I couldn't get Multi-macros to work. I'll experiment with them later.
Thanks for your help!!
UPDATE:
I put a single MultiDSM (does that even make sense?) on the BluRay STOP key, which just sends the Eject (Open/Close) signal. It works. Short press, Stop, Long Press Open/Close. It's great to be able to get around some of the restrictions imposed by the remote's interface, this is like having an extender! Thanks again. _________________ URC7560/URC7562, URC8910, URC7980, URC6440/OARUSB04G and URC3661
Last edited by davecs on Tue Apr 04, 2023 5:00 pm; edited 1 time in total |
|
Back to top |
|
|
MaskedMan Tivo Expert
Joined: 10 Feb 2004 Posts: 1008 Location: Boone, IA |
Posted: Tue Apr 04, 2023 2:36 pm Post subject: |
|
|
davecs wrote: | The Robman wrote: |
That's asking, is 176.0 a different number to 160.10. Yes, different signals. |
OK. It was noticeable that the OBC's were the same across the board though. I guess they'd have to be different, otherwise it would be impossible to have a Panasonic CD and a Panasonic DVD/Bluray player at the same time. |
All Blu-ray players can play Cd's, it doesn't mean they will respond to the separate cd code set from the same brand. Your Panasonic prioritizes dvr over the disk drive, so it wouldn't matter if it were a Blu-ray, DVD, or CD disk in it. _________________ Edmund |
|
Back to top |
|
|
davecs
Joined: 28 Mar 2005 Posts: 328 Location: UK |
Posted: Tue Apr 04, 2023 2:59 pm Post subject: |
|
|
MaskedMan wrote: | All Blu-ray players can play Cd's, it doesn't mean they will respond to the separate cd code set from the same brand. Your Panasonic prioritizes dvr over the disk drive, so it wouldn't matter if it were a Blu-ray, DVD, or CD disk in it. |
I think you're right, but I will test it to make sure.
TEST: No it doesn't work. _________________ URC7560/URC7562, URC8910, URC7980, URC6440/OARUSB04G and URC3661 |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Tue Apr 04, 2023 5:56 pm Post subject: |
|
|
davecs wrote: | MaskedMan wrote: | All Blu-ray players can play Cd's, it doesn't mean they will respond to the separate cd code set from the same brand. Your Panasonic prioritizes dvr over the disk drive, so it wouldn't matter if it were a Blu-ray, DVD, or CD disk in it. |
I think you're right, but I will test it to make sure.
TEST: No it doesn't work. |
I was going to suggest the DVD code next, but 176.0 obc 10 *is* the DVD code for PLAY, so you're out of luck. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
davecs
Joined: 28 Mar 2005 Posts: 328 Location: UK |
Posted: Wed Apr 05, 2023 4:04 am Post subject: |
|
|
The Robman wrote: |
I was going to suggest the DVD code next, but 176.0 obc 10 *is* the DVD code for PLAY, so you're out of luck. |
I wouldn't worry. There was an omission from the RDF for the 3661, now Hamburger showed me how to fix it, I can make everything work. _________________ URC7560/URC7562, URC8910, URC7980, URC6440/OARUSB04G and URC3661 |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4524 Location: Cambridge, UK |
Posted: Mon Apr 10, 2023 1:39 pm Post subject: |
|
|
davecs wrote: | I wouldn't worry. There was an omission from the RDF for the 3661, now Hamburger showed me how to fix it, I can make everything work. |
RMIR v2.15.0 is getting close, so if you are aware of any omissions such as this, please post it here.
You seem to be a very active group of users in this thread. I am in two minds as to whether to post RMIR v2.15.0 initially in the RMIR Development folder or to go straight to a full release, so everyone can respond if they find bugs. If you, collectively, are willing to give it a good test on the 3660/3661, which is one of the more complicated remotes we support, then I will go the Development route. Be aware that there may well be bugs, as v2.15.0 is a really major overhaul that affects all remotes to some extent, but the 3660/3661 and the XSights in particular. _________________ Graham |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|