View previous topic :: View next topic |
Author |
Message |
earth__22
Joined: 21 May 2022 Posts: 5
|
Posted: Thu Mar 09, 2023 10:38 am Post subject: URC7955 BT112-Dongle - no Upload after extender installation |
|
|
Hi,
I have conencted my urc7955 via bluetooth (BT112) and installed the bluetooth extender V1.00 (hex-file) successfully.
Upload to remote is still disabled.
After reconnect via bluetooth the RMIR says:
Please not that this remote needs an extender in order to support uploading via its Bluetooth interface.
So do i need V2.0 of extnder (rmir-file)? So I have to upload this rmir via cable? because upload is disabled...
Thanks for your support. |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4524 Location: Cambridge, UK |
Posted: Thu Mar 09, 2023 12:42 pm Post subject: |
|
|
I take it that when you say the extender installed successfully, you do mean that when you pressed Power with TV/1800 as the selected device, you got two flashes of the LED as described in the ReadMe. If so and RMIR still reports that you need an extender, then something is wrong.
You should not need v2.0 of the extender to work with the dongle. When you get that message, please close RMIR and post the rmaster.err file (in your RMIR installation folder) to me to look at, to see if that gives any clue as to what is wrong. _________________ Graham |
|
Back to top |
|
|
earth__22
Joined: 21 May 2022 Posts: 5
|
Posted: Thu Mar 09, 2023 3:04 pm Post subject: |
|
|
Hi,
thanks for the hint that two flashes must occur at the LED, repeated the installation and now it works, download AND upload.
Thank you for your fast reply.
/Alex |
|
Back to top |
|
|
|