HDFury Diva and OFA URC1280 Remote

[NilsH]

Hello!

I got myself a HDFury Diva. Unfortunately it does not come with an IR Remote for switching the inputs.

Instead it comes with pronto hex codes in text form. The documentation also states, that the Logitec Harmony remotes are compatible.

Unfortunately I dont have a Harmony but a OFA Contour 8 (URC-1280).

I successfully managed to connect the URC1280 to my computer with a JP1 cable and RM was able to download from the remote.

But since I have no experience and close to no knowledge about IR remotes I now need help.

I would like to assign below Diva functions to some buttons on my remote.

The pronto hex looks like this:

Code: Select all

diva_inputsel0x: 
diva_inputsel0x: NEC 0xa6 0x04
0000 006e 0000 0022 0156 00ab 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 1d0b

diva_inputsel1: 
diva_inputsel1: NEC 0xa6 0x01
0000 006e 0000 0022 0156 00ab 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 1d0b

diva_inputsel1x: 
diva_inputsel1x: NEC 0xa6 0x05
0000 006e 0000 0022 0156 00ab 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 1d0b

diva_inputsel2: 
diva_inputsel2: NEC 0xa6 0x02
0000 006e 0000 0022 0156 00ab 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 1d0b

diva_inputsel2x: 
diva_inputsel2x: NEC 0xa6 0x06
0000 006e 0000 0022 0156 00ab 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 1d0b

diva_inputsel3: 
diva_inputsel3: NEC 0xa6 0x03
0000 006e 0000 0022 0156 00ab 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 1d0b

diva_inputsel3x: 
diva_inputsel3x: NEC 0xa6 0x07
0000 006e 0000 0022 0156 00ab 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 1d0b

Could anyone of you pros kindly point me in the right direction?

Any help would be much appreciated!
Thanks!

[Barf]

Strinctly speaking, this is such a simple system, so you can just open RMDU and type in the protocol, the device number (x0a6 = 166) and the function number (as OBC in RMDU).

Otherwise a general and flexible import method is described in this WiKi article.

Or, if you you are the type who likes to have fish shoved down your throat instead of learning how to fish, here is the Girr file, and here is the the device update.

Enjoy.

[NilsH]

Strinctly speaking, this is such a simple system, so you can just open RMDU and type in the protocol, the device number (x0a6 = 166) and the function number (as OBC in RMDU).

Otherwise a general and flexible import method is described in this WiKi article.

Or, if you you are the type who likes to have fish shoved down your throat instead of learning how to fish, here is the Girr file, and here is the the device update.

Enjoy.

Thanks a lot! I managed to get the buttons programed, that I needed!