View previous topic :: View next topic |
Author |
Message |
xxnonamexx
Joined: 11 Jan 2022 Posts: 6
|
Posted: Tue Jan 11, 2022 6:05 am Post subject: Macros with inteset remote |
|
|
inteset remote programming macros. I have a Samsung tv and Denon AVR asking with FiOS cable box. The cable box is always on. I would like this remote to be able to turn the avr and tv on together. I would also like another button to be able to have the tv function to select input to view the media option. I also see you can set this up to Netflix but don't get how to set that up. Any help much appreciated. Thanks |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Tue Jan 11, 2022 2:27 pm Post subject: |
|
|
Please tell us what setup codes you're using for the Samsung and the Denon. I assume you are programming the Inteset manually, not using a JP1 cable or Remote Master, correct?
Lastly, I think if you enable AnyNet on your Samsung and HDMI control on your Denon, turning the TV on and off will automatically turn the Denon on and off. Regardless, I'll find the necessary power codes for each and post them here.
In the mean time, test the following codes by switching to the correct mode (TV or AVR), then tapping SET followed quickly by the 5 digits listed for each command and let us know if they work properly.
TV
00001 Power On
00253 Power Off
00009 Smart Hub Home (Media?)
AVR
01917 Power On
02045 Power Off
01961 TV Input (also acts as power on) |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Tue Jan 11, 2022 9:01 pm Post subject: |
|
|
Try 00147 for Netflix and 00060 for Media Play. |
|
Back to top |
|
|
xxnonamexx
Joined: 11 Jan 2022 Posts: 6
|
Posted: Wed Jan 12, 2022 10:24 am Post subject: |
|
|
Before I try these codes how should I start since as of now when I press my verizon remote it turns on the TV and AVR (but the AVR doesn't always make the TV go on which is why I got new remote) Shouls I turn the TV off and just have AVR on then program one device first: TV
00001 Power On
00253 Power Off
Then program the next device AVR VR
01917 Power On
02045 Power Off
01961 TV Input
then try different device button for Netflix and media play? Try 00147 for Netflix and 00060 for Media Play |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Wed Jan 12, 2022 11:17 am Post subject: |
|
|
One step at a time. We're not programming anything yet. We're just testing to see which codes work.
Once we know which commands actually work, we'll get into the programming of the macros.
If I were testing Off, I'd make sure the device is on first. If I were testing On, I'd make sure the device is off. Otherwise you won't be able to tell if it worked. For simplicity and to rule out any HDMI commands, turn both the TV and AVR off before you start, then test TV ON first.
You also need to answer my questions. |
|
Back to top |
|
|
xxnonamexx
Joined: 11 Jan 2022 Posts: 6
|
Posted: Wed Jan 12, 2022 1:34 pm Post subject: |
|
|
I tried with devices off the codes didn't work.
I tried with the devices on and for the AVR 32857 turned on/off.
I tried the codes on the inteset for 422-3 site and you mentioned for Samsung TV and none work. Anynet+ is turned on. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Wed Jan 12, 2022 3:55 pm Post subject: |
|
|
The fact that none of the Samsung codes from the inteset site worked is a problem. It looks like you're going to have to learn power from the original TV remote if possible. Let me know if you can do that successfully. |
|
Back to top |
|
|
xxnonamexx
Joined: 11 Jan 2022 Posts: 6
|
Posted: Wed Jan 12, 2022 4:56 pm Post subject: |
|
|
The weird part is when I use the code to turn the avr off the the tv goes off along with it but then comes back on. I will try the tv codes again |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Wed Jan 12, 2022 5:33 pm Post subject: |
|
|
xxnonamexx wrote: | The weird part is when I use the code to turn the avr off the the tv goes off along with it but then comes back on. I will try the tv codes again | Yeah, that's HDMI CEC control doing its automatic thing. The AVR is actually turning off the TV, then some other source plugged into it is turning it back on. If we can get a working TV off code, then we can just put multiple ones in our macro eventually.
Another option is to turn off Anynet and HDMI control in all your devices. That way, none affect any of the others.
When you test the Samsung codes, make sure the AVR is off. |
|
Back to top |
|
|
xxnonamexx
Joined: 11 Jan 2022 Posts: 6
|
Posted: Wed Jan 12, 2022 8:41 pm Post subject: |
|
|
By turning off Anynet the HDMI will control my devices or is that something else I need to turn off? Also would the Cable box have any affect as its set to always be on? Thanks |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
|
Back to top |
|
|
xxnonamexx
Joined: 11 Jan 2022 Posts: 6
|
Posted: Fri Jan 14, 2022 5:20 pm Post subject: |
|
|
thats for the read. What would cause mine not to be as reliable? I will check the codes again this weekend with the remote. |
|
Back to top |
|
|
|