JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Inteset 422-2 activate extender

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
Carmat06



Joined: 01 Jan 2016
Posts: 9

                    
PostPosted: Wed Oct 06, 2021 6:03 pm    Post subject: Inteset 422-2 activate extender Reply with quote

I have a Inteset 422-2 remote and a JP1 cable. I have installed the Common JP1.3 extender version 3.05 into a rmir file and uploaded it into the remote. The readme instructions say the following about activation:

Code:
The keymove to activate is on the TV/OK key (not visible to RMIR).  To activate, press the TV/OK key after initial upload to the remote.  When the extender is activated, the device button will flash 4 times to  indicate activation.  Until deactivated, the extender will remain active.


I'm not sure what the TV/OK button is that the instructions refer to is, but this remote has a setup button, and I have tried long pressing that and I do not get the 4 flashes of the light, I also tried the big center ok button, and the button "B" button I am using for TV. The setup button long press yields 2 flashes and the other buttons just flash the normal once for a key press.

I feel like I'm missing something obvious here?
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Wed Oct 06, 2021 6:43 pm    Post subject: Reply with quote

Device mode: TV
Button: OK (in the middle of the 4 arrow buttons)
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Carmat06



Joined: 01 Jan 2016
Posts: 9

                    
PostPosted: Sun Oct 10, 2021 2:33 pm    Post subject: Reply with quote

For others with this Inteset 422-2: On this remote there are no hard labeled devices, instead there are A, B, C, and D. To activate the extender Press device A, then long press OK.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control