View previous topic :: View next topic |
Author |
Message |
ckeays
Joined: 12 Jan 2015 Posts: 129 Location: Toronto, Ontario |
Posted: Thu May 27, 2021 8:47 am Post subject: oarc05g won't learn on select key |
|
|
Hi Everyone.
I have a oarc05g learning remote. The remote successfully learned all commands in all modes except TV mode. In TV mode it will not learn commands for keys, 0, LAST, MUTE, and OK/ENTER.
So I thought I would try the direct code entry. I found the TV code for my TV, however the OK/Enter command is wrong. All other commands are correct.
Since the remote is a learning remote, I tried to force it to learn the OK/Enter command from the original remote. This has failed every time.
I tried the obvious, new batteries, operational reset (980), and still nothing.
The OK/Enter key will successfully learn any code in all other modes except TV mode.
The TV code is 10000 for a Sony TV. (It's actually an RCA TV, but uses Sony12 protocol)
Just curious if anyone has this issue? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ckeays
Joined: 12 Jan 2015 Posts: 129 Location: Toronto, Ontario |
Posted: Thu May 27, 2021 10:51 am Post subject: |
|
|
Yes that's the one. 5 device One For ALL Learning Remote.
I did manage to get another remote (exactly the same) to work with the select key in TV mode.
weird, the remote is new. The OK/enter key and membrane are fine (it learns and works in all other modes)
I thought a reset would clear everything but it did not help. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ckeays
Joined: 12 Jan 2015 Posts: 129 Location: Toronto, Ontario |
Posted: Mon May 31, 2021 6:49 am Post subject: |
|
|
After multiple operational resets (setup, 980), the select key now learns in TV mode. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|