I put a piece of tape partially over the AC's IR window I can still control it if I point my remote directly at it
Have you tried polarized foil; one orientation on each receiver?
Considered buying a remote ("RC-671T"), possibly used, capture it, and then sell it again at eBay (or try to return it to the seller)?
No I have never even knew that existed! Anyway the problem is solved for now at-least. I guess I can buy it and return it but that does not seem right to me maybe I can ask the seller if I can "borrow" it or maybe on the off chance they have the hardware to do it or maybe has the code sheet available.
I'll ask the seller and see what they say, never hurts to try I guess.
The Robman wrote:I have no idea why your NEC1 210.37 upgrade is interfering with your NEC1 152.111 upgrade, maybe if I studying the two patterns I might find something, but it's also possible that the Haier responds to more than one codeset.
Both manuals confirm that the unit does have 3 IDs and it shows you how to switch the device to ID2 or ID3, but it doesn't give any code info for id2 or ID3. But if I were you, I'd try 210.38 first.
OK I found some $ and I bought the Integra remote I only did a few buttons as a test well it ID 2 uses NEC-F16 with 2 OBCS I will do a full learn latter how do you get a good learn as most say "Malformed IR code" I have the NEVO C2 that is a good learner but it is not good anything else I use it just to "take" codes from another remote for this I used my RCA RCR05 remote
Thank You
Latter I will try to get a full learn of ID 2 & ID 3 I just did a test to see what was different
If you can learn as many as you can, don't worry if you can't get all of them, and post your RMIR file with the learns, I can probably get everything I need from it.
Rob www.hifi-remote.com Please don't PM me with remote questions, post them in the forums so all the experts can help!
The Robman wrote:If you can learn as many as you can, don't worry if you can't get all of them, and post your RMIR file with the learns, I can probably get everything I need from it.
I got the RC-672T as that was the one that says Integra on it however both use the same hardware
I did get all three remote ID's learned and I uploaded a zip file with 3 *.RMDU files inside one for each remote ID I find the way that they accomplished this weird but it no longer messes with my cool! (window rattler is not affected anymore)