JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

"Conflicts with built-in protocol" message for dev

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
chileboy



Joined: 26 Aug 2020
Posts: 83
Location: NJ

                    
PostPosted: Mon Aug 31, 2020 1:18 pm    Post subject: "Conflicts with built-in protocol" message for dev Reply with quote

I'm seeing this on my Laserdisc device, and no tabs are accessible:




It's a Pioneer Elite CLD-97 and I used the upgrade file PioneerLaserDiscs.txt. The upgrade functions work just fine on the player from my Xsight.

Yes, I still use a laserdisc player, don't judge me! Laughing
_________________
- Mark
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Mon Aug 31, 2020 2:57 pm    Post subject: Reply with quote

Just FYI, whenever you make a post about a specific file, please include a link to the file to save folks having to search for it, and it confirm that we're looking at the right file.

i believe this is the file that you are trying to use:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=315

There's something funny going on with the Pioneer MIX protocol, not sure why it's not loading for this remote, but regardless, in this case the solution is to use a different Pioneer LD file, such as the following, which should load without issue.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4817
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
chileboy



Joined: 26 Aug 2020
Posts: 83
Location: NJ

                    
PostPosted: Mon Aug 31, 2020 3:14 pm    Post subject: Reply with quote

The Robman wrote:
Just FYI, whenever you make a post about a specific file, please include a link to the file to save folks having to search for it, and it confirm that we're looking at the right file.

i believe this is the file that you are trying to use:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=315


My apologies (I seem to be saying that a lot) - I will be sure to include links going forward...but yes, that's the file.

The Robman wrote:

There's something funny going on with the Pioneer MIX protocol, not sure why it's not loading for this remote, but regardless, in this case the solution is to use a different Pioneer LD file, such as the following, which should load without issue.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4817


OK, I will give that a go...thank you, as always.
_________________
- Mark
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Mon Aug 31, 2020 4:24 pm    Post subject: Reply with quote

Rob, if you look at the Xsight RDF, the 007E protocol is actually 007E:4, so not the exact match RM is looking for. Not sure what's different about that version.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Mon Aug 31, 2020 4:38 pm    Post subject: Reply with quote

mdavej wrote:
Rob, if you look at the Xsight RDF, the 007E protocol is actually 007E:4, so not the exact match RM is looking for. Not sure what's different about that version.


I did see that, and I expected it to sync up with this...

[Pioneer MIX]
PID=00 7E
VariantName=4
DevParms=Device 0=165, devOBC1=91,devOBC2=94,devOBC3=89,devOBC4=92, DevP2=175
DeviceTranslator=Translator(lsb,comp,0,8,0) Translator(lsb,comp,1,8,8) Translator(lsb,comp,2,8,16) \
Translator(lsb,comp,3,8,24) Translator(lsb,comp,4,8,32) Translator(lsb,comp,5,8,40)
FixedData=9A 7A FA 00 00 0A
DefaultCmd=00 00
CmdIndex=0
CmdParms=Prefix Device:none|dev1,Prefix Command:none|Cmd1|Cmd2|Cmd3|Cmd4,Device:dev0|dev1|dev2|dev3|dev5,OBC=0
CmdTranslator=Translator(lsb,comp,3) PioneerMixTranslator(4)
CmdParmInit=PickInitializer(0,,0) PickInitializer(1,,1,2,3,4) PickInitializer(2,0,1,2,3,5)
ImportCmdTranslator=Translator(0,2,14) Translator(lsb,comp,1,8,0)
Notes=For single-style signals, you may select any of the 4 device numbers entered in Device 0, devOBC1, devOBC2, or devOBC3 \n\n\
For double-style signals, the prefix device number must be entered in Device 0. Prefix OBCs may be selected from devOBC1 through devOBC4\n\
The main device number must be entered in DevP2
Code.S3C80=40 84 62 8B 14 A5 54 08 08 01 12 00 F0 01 12 03 02 32 B4 10 B0 08 39 00 02 08 0A C0 C0 56 C0 0B 7B 0B 87 10 03 19 03 46 29 01 8D 01 46 87 10 04 19 04 56 29 EF 0C 03 A6 0D 02 EB 02 0C 05 09 0D B0 01 E6 10 01 F6 FF 56 FB 06 F6 FF 50 7B F1 AF E6 01 05 E6 10 06 F6 01 46 8D 01 0A
Code.HCS08=20 17 21 43 62 A5 54 08 08 01 11 01 04 01 11 03 16 32 C8 10 AF 08 4D 00 02 8C B6 67 44 A4 03 97 00 67 09 E6 60 B7 60 10 A3 CC FF 5F E6 61 B7 61 19 A3 B6 B2 A1 02 27 03 6E 01 B2 3F AC 6E 01 A9 AD E7 6E 05 AC 6E 06 A9 AD DF CD FF 92 25 EC 81
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control